Quadrotor control framework developed by the Robotics and Perception Group
sbus 开源项目推荐(50 个)
sbus 话题在 GitHub 上没有填写简介,这里按 Star 数汇总最相关的热门仓库。
热门项目 前 20
按 Star 数排序展示前 20 个 · GitHub 共 50 个仓库Arduino and CMake library for communicating with SBUS receivers and servos.
Allows to play vehicle engine sounds on an ESP32. Additional sounds can play in parallel with the engine sound! Controls your lights as well. compatible with SBUS, IBUS, PWM, PPM and SUMD signals.
Feed Virtual Joystick driver with data from a serial port
Raven Long Range System
An Atmega328P based 2.4GHz receiver with integrated TB6612FNG motor driver. PWM and SBUS outputs.
An Arduino 2.4GHz and IR remote controller with OLED display
Arduino Library for SBUS and SBUS2 with Futaba Telemetry
Linux/Raspberry Pi SBUS driver
A high-performance, universal UART to USB bridge that works with any serial protocol or device
STM32_RadioLink_SBUS_DMA
This Arduino-Sketch lets you connect your SBUS compatible radio wirelessly as controller to your pc.
This Arduino sketch expands the SBUS using an Arduino such as a small Ardiono Nano or ProMicro making the full 16 channels available on your FrSky compatile RC receiver (such as the XR8 or XR4) which would otherwise be limited to just a few PWM ports. This sketch gives additional possibilities with your RC projects such as proportional or pre-se…
3 Axis Kino wheels to command a DJI Ronin via SBUS protocol using Arduino boards.
Arduino drivers for the Flix drone peripherals: MPU-9250, MPU-6500, ICM-20948, MPU-6050, ICM-40609-D, SBUS receiver
An Arduino library for decoding multiple RC protocols.
Futaba SBUS protocol decoder for Saleae Logic 2
SBUS-Switch for radio controlled models
The Futaba Sbus bridge works on ROS2
该项目在 GitHub 上没有填写描述
关于这个话题
- 清单取自 GitHub 话题页并按 Star 数排序,每次展示前 20 个项目;原始页面见 https://github.com/topics/sbus。
- 该话题在 GitHub 上共有 50 个仓库, 本站收录的是其中最热门的 20 个,不是全量列表。
- Star / Fork 每日自动刷新一次,实时数据以 GitHub 为准。
- 当前 20 个项目累计 2807 Star,覆盖 7 种主要语言,数据更新于 2026-11-07。
- 中文介绍来自 GitHub 官方话题说明(github/explore)的机器翻译,可点「查看原文」对照;译文缺失时会先展示原文。