Component library for ESP32-xx and ESP8266
ESP8266 RFID (RC522, PN532, Wiegand, RDM6300) Access Control system featuring WebSocket, JSON, NTP Client, Javascript, SPIFFS
A tool for logging data/testing devices with a Wiegand Interface. Can be used to create a portable RFID reader or installed directly into an existing installation. Provides access to a web based interface using WiFi in AP or Client mode. Will work with nearly all devices that contain a standard 5V Wiegand interface. Primary target group is 26-37…
HydraBus HydraFW official firmware for open source multi-tool for anyone interested in learning/developping/debugging/hacking/Penetration Testing for basic or advanced embedded hardware
Wiegand data logger, replay device and micro door-controller
The Tick is the next evolution in covert access control system implants for simulating adversary-in-the-middle attacks.
ESP8266 RFID (RC522, PN532, Wiegand, RDM6300) Access Control system featuring WebSocket, JSON, NTP Client, Javascript, SPIFFS
Hacking-Tool for logging, testing and replaying data of devices with Wiegand Interface
ESP8266 RFID - Access Control board Wiegand Protocol compatible and powerd by Door Bell transformer 8-12V AC or DC
A Flipper Zero that stops guessing and starts reasoning: ML-guided RFID/NFC fuzzing & access-control auditing that turns raw card reads into a prioritized, explainable security assessment. Defensive-use only.
PiDoors - Wigand Access Control System using Raspberry Pi
Library for receiving data from the Wiegand26 card readers, it's made for the Arduino IDE and for an Arduinos, ESP32 and ESP8266 devices.
A tool for logging data/testing devices with a Wiegand Interface. Can be used to create a portable RFID reader or installed directly into an existing installation. Provides access to a web based interface using WiFi in AP or Client mode. Will work with nearly all devices that contain a standard 5V Wiegand interface. Primary target group is 26-37…
Python wiegand reader on raspberry
RaspberryPi Pico Wiegand reader/emulator
Encode and decode 26-bit, 34-bit, or 38-bit Wiegand protocol credentials for communicating with access control systems in TypeScript or JavaScript
OpenSesame is an open-source access control for egress hardware. OpenSesame facilitates authentication and authorization of access requests.