freescale 开源项目推荐（59 个）

xboot /xboot

面向嵌入式系统的可扩展引导加载程序，带有应用引擎，一次编写，到处运行

canselcik /libremarkable

The only public framework for developing applications with native refresh support for Remarkable Tablet

Embedded-AMS /EmbeddedProto

Embedded Proto is a C++ Protocol Buffers implementation specifically suitable for microcontrollers. It is small, reliable and easy to use.

pyavitz /debian-image-builder

Debian 镜像构建器

holdjun /NXP_12th_BalanceCar

2017 年第十二届全国大学生“恩智浦”杯智能汽车竞赛全国一等奖 - 匿名队伍

dsp56300 /dsp56300

Motorola/Freescale DSP 56300 family emulator

howborn /smart-car-freescale

第九届飞思卡尔智能车参赛作品

tomstorey /c1600re

Documentation of an effort to reverse engineer a Cisco 1603R router, with the end goal to run my own code on it (in particular FreeRTOS)

Bonstra /linux-ls1024a

Linux v6.x with WIP support for the Freescale LS1024A SoC and the TS-x31 NAS family from QNAP.

FARLY7 /xcan-router

A CAN Gateway framework, offering CAN frame-based routing across multiple interfaces and protocols.

InitialChris /hc08-fault-injection

Hardware fault injection toolkit for Freescale/NXP MC68HC908/MC68HC08 microcontrollers.

karthickai /python-arm-xcompile

Build script and patches for cross-compiling Python to target ARM

Sciroccogti /Scuderia_Smartcar_Mission_Doublenow

MISSION DOUBLENOW! 东南大学第十四届智能车校赛双车接力组，第十五届全国大学生智能车竞赛华东赛区二等奖，勉强完赛的水平。

Lauszus /pyblhost

Python implemented of blhost used to communicate with the NXP MCUBOOT/KBOOT bootloader

wangben85 /imx6ul_freertos

The usecase code repository based on imx6ul EVK, including QRdecoder(with Zxing library),DVFS,Power_Mode_Switch,etc

sarincr /ARM_Microcontroller_NXP_Freescale_KL25Z

Basic and Advanced experiments on NXP Freescale KL25Z Micro-controllers

whutddk /MK64F-platform

A PCB platform based on the architecture of Arm + FPGA

HausRummel /Ghidra-Processor-MC68HC16Z

Ghidra SLEIGH processor module for the Motorola/Freescale MC68HC16 (CPU16): disassembly, p-code and decompiler support, with bare-core, MC68HC16Z2/Z3 and JTEC+ profiles.

cr3ative /rcd_330g_image_utilities

Python scripts to convert a `.bin` files from an RCD330G stdplus radio.

SkyEng1neering /ustring

This is the magic implementation of dynamic string. Based on dalloc allocator, that solves memory fragmentation problem. So you can use it in your embedded project and not to be afraid of program crash by reason of memory fragmentation.