digipeater 话题在 GitHub 上没有填写简介，这里按 Star 数汇总最相关的热门仓库。
Dire Wolf is a software "soundcard" AX.25 packet modem/TNC and APRS encoder/decoder. It can be used stand-alone to observe APRS traffic, as a tracker, digipeater, APRStt gateway, or Internet Gateway (IGate). For more information, look at the bottom 1/4 of this page and in https://github.com/wb2osz/direwolf/blob/dev/doc/README.md
LoRa APRS iGATE for ESP32 Based Board with Rx + Tx capabilities
LoRa APRS Tracker with Tx and Rx capabilities, Messages, Wx, Winlink and more...
该项目在 GitHub 上没有填写描述
Repo for APRS PropView - Propagation at your antenna
Linux (Rockchip RV1106) based SA818V (144 MHz) board for AFSK APRS to run Direwolf
ESP32 LoRa AX.25 TNC with KISS, WA8DED, APRS, NET/ROM, BBS, and connected-mode digipeating.
AX.25 packet radio digipeater for linux
APRS routing library
Forked version of direwolf for SDR-based highly parallelized applications.
Minimalistic embedded Linux system for setting up APRS digipeaters and/or internet gateways
aprgo is a modern, mobile-friendly, self-hosted APRS Suite for Ham Radio Operators
APRS client for Windows, macOS, Linux and the Raspberry Pi: any KISS TNC on VHF, and APRS over HF with the Mercury modem built in.
Winlink digipeater setup guide
Modified version of the Microsat WX3in1 Plus 2.0 Configurator v1.13 allows TX delay down to 100ms and beacons intervals of 1 minute.
Turns a Dragino LG01-P into a multi-mode raw LoRa node at 433MHz: KISS TNC over TCP, standalone APRS digipeater + iGate, and a Reticulum network interface — no LoRaWAN, no reflash to switch modes.
Simple program for single port digipeater for AX.25