carrier-board 开源项目推荐（15 个）

piecol /CM5_MINIMA_REV2

Compact, feature-filled CM5 carrier board

radxa /radxa-som-projects

Radxa SoM carrier board design files + agentic hardware-db

laenzlinger /granit

Custom carrier board for Raspberry Pi CM4/CM5 — minimal offsite backup appliance with JMS578 USB-to-SATA bridge

lamggm /RASPBERRY_PI5_Module

KiCad symbol and footprint for Raspberry Pi 5 module/carrier board integration

Rufilla /LuckFox-Core3506-Carrier

A carrier board for the LuckFox 3506 designed in KiCAD 10

SimulatedFlow /kicad-board-2026-07-16-bluepill-smartnode-rs485

STM32 Bluepill SmartNode - RS485 bus node carrier with 2 relays for Modbus / field bus setups. Hand-solderable THT, bare PCB. KiCad source files.

SimulatedFlow /kicad-board-2026-07-16-bluepill-io-carrier

STM32 Bluepill IO carrier board - breakout / baseboard with screw terminals, relay and GPIO headers. Hand-solderable THT, bare PCB. KiCad source files.

SimulatedFlow /kicad-board-2026-07-27-bluepillcomnode

STM32 Bluepill ComNode - industrial comms carrier with RS485, CAN bus and 0-10V analog interface. Hand-solderable THT, bare PCB. KiCad source files.

KevinLADLee /unitree-go2-jetpack6.x-patches

JetPack 6.x / L4T patches for Unitree Go2 EDU Orin NX dock: hybrid DTB, USB3, Type-C DP, PP.06 GPIO, SSH and wired IP setup.

SimulatedFlow /kicad-board-2026-07-16-bluepill-relay-carrier-2ch

STM32 Bluepill 2-channel relay carrier board - baseboard for two relays with screw terminals. Hand-solderable THT, bare PCB. KiCad source files.

DoImant /DOGM-LCD-Carrier-Board

DOGMxxxxA carrier board

AsadImranRafique /CM5-Carrier-Board

Custom Raspberry Pi CM4/CM5 carrier board with PoE, Gigabit Ethernet, M.2 NVMe, microSD and peripheral interfaces.

hiibrarahmad /PRJ-PCB-1001-2024-Dermscope-Revive.github.io

Carrier PCB for INVENSOM-6UL SOM — DermScope REVIVE handheld dermatoscope by Revive Medical Technology

SimulatedFlow /kicad-board-2026-07-18-bluepill-relay-carrier

STM32 Bluepill relay carrier board - single-channel relay baseboard with screw terminals. Hand-solderable THT. KiCad source files.

mohanan02 /MiBeesFly

🚧 Work in progress | A guide to Designing a Drone - MiBeesFly 🐝 – a custom flight controller built from scratch: carrier board + firmware for a 450 quad. GPS, compass, optical flow, lidar and barometer fused for drift-free flight indoors and out.