bmp390 开源项目推荐（21 个）

libdriver /bmp390

BMP390 full-featured driver library for general-purpose MCU and Linux.

gavinlyonsrepo /sensors_PICO

Combined Sensors library. A SDK C++ library for Raspberry PI PICO's. Supported list : BMP390 BMP280 LM35 LM75A DHT11 AHTXX

antoinecellerier /lowpower-epaper-thermometer

Experiment in building a simple battery powered ESP32 e-Ink room temperature thermometer

johntalton /boschIEU

Bosch Integrated Environmental Unit (bmp280 / bme280 / bme680 / bmp388/ bmp390)

Ozonised /BMP390-CPP-Library

A platform independent CPP library for BMP390 barometric sensor.

Sadteeto /BuhSat-v0

buh

danielljeon /nerve_pcb

PCB for CAN-based control systems dev platform

umrx-sw /umrx-v3-py

Communication with Bosch Sensortec Application Board 3.0 / 3.1 from python 3

gavinlyonsrepo /BMP390_LTSM

A feature-complete Arduino library for the BMP390 high-precision pressure and temperature sensor. Supports FIFO buffering, watermark interrupts, I2C/SPI communication, and altitude estimation. Compatible with ESP32 and other Arduino platforms. Six examples included

danielljeon /nerve

Firmware for CAN-based control systems dev platform

TenkyuChimata /WeatherStation

A weather station project that using STM32.

sscopazzi /Portable_Weather_Station

Cheap, small, and high precision standard meteorological weather data in a convenient to carry form-factor

Justwinyourheart /IMU_for_rpi

🛠️ Simplify I2C communication with clean C code for Bosch 10-axis IMU sensors on Raspberry Pi, enabling accurate motion and environmental data processing.

abdullahsha90 /teensy-flight-computer

Teensy 4.1 flight computer with onboard telemetry logging and Python analysis tools

Cparrish72 /Rocket_Code

Code for a model rocket to monitor the position of gimbaled motor and measure temperature, pressure, altitude.

j-lag /IMU_for_rpi

Simple and easy to understand C reference implementations for the Bosch Sensortec BMI323, BMM350, and BMP390 sensors commonly found on 10-axis IMU breakout boards. Pure C99, no dependencies, works on any Linux system with I2C.

Oscar-bl-05 /BMP390-Driver-ESP32

BMP390 barometric sensor driver (SPI) for ESP32-S3 in C/ESP-IDF.

matteusch /vtal-fitness-tracker

VTal is a wearable fitness tracker that utilises MAX30102, BMP390, and LSM6DSOX sensors to monitor a user's physical activity and vital signs. Powered by an STM32 (NUCLEO-L432KC) microcontroller, the device streams real-time biometric and kinematic data via an HC-05 Bluetooth module to a custom PC dashboard, which utilises Qt6 for visualisation.

catfries456 /IMU_for_rpi

🛠️ Implement simple C code for Bosch 10-axis IMU sensors on Raspberry Pi with no dependencies, enabling smooth I2C communication and data output.

gentoid /sensors-node

An ESP32S3 based node with various sensors