MagAlpha-Calibration-Curve-Toolbox

MagAlpha-Calibration-Curve-Toolbox

Collection of tools and code examples designed to help users improving the accuracy of the MPS MagAlpha magnetic angle sensor by implementing a calibration curve.

Features

This project contains the following features:

• Calibration curve generator
• Angle Interpolation
• Ma-Cal-Generator App

Calibration curve generator

C source code that generate a lookup table with the angle error.

The source code can be found in src/calibration-curve-generator

Angle Interpolation

C source code that compute the corrected angle using the previously generated lookup table.

The source code can be found in src/angle-interpolation

Ma-Cal-Generator App

C++ application that embed the two aforementioned source codes inside a executable test program.
The application take a CSV file containing the reference and measured angle as input parameter, generate a lookup table of the angle error and then use this lookup table to correct the measured angle. The application return a CSV file with the both the input parameters and the computed corrected angle. This output file will be placed on the output-files folder.

The source code can be found in src/ma-cal-generator

Installation

Ma-Cal-Generator App

The Ma-Cal-Generator application use Qt Open Source Framework. You can either directly use the compiled Windows executable or you can build it yourself.

Use the Pre-Built executable

The executable can be found in the bin.zip on the Releases page. The executable is provided along the required Qt DLLs.

Unzip the files and copy the bin folder into the main MagAlpha-Calibration-Curve-Toolbox folder. You should have something like this:

MagAlpha-Calibration-Curve-Toolbox
├───bin
├───docs
├───input-files
└───src
    ├───angle-interpolation
    ├───calibration-curve-generator
    └───ma-cal-generator

Build the project

Start by downloading and installing the Qt Open Source Framework.

Then open Qt Creator, go to File => Open File or Project… and select src/ma-cal-generator/ma-cal-generator.pro. The last step is to built the project. The executable will be located on the bin folder.

This project was built and tested with Desktop Qt 5.7.0 MinGW 32bit for Windows but it should works as well with the latest Qt version.

Calibration curve generator & Angle Interpolation

These source files doesn’t require any installation, simply copy the .c and .h files in you project. They only require the math.h library to works and should therefore be portable to almost any microcontrollers, embedded systems and desktop environments that use C language.

How to use it

Ma-Cal-Generator App

Navigate to the MagAlpha-Calibration-Curve-Toolbox\bin folder and launch one of the following commands:

You can use the default input CSV file located in ..\input-files\calibration_data_input_example.csv.

ma-cal-generator.exe

Or you can specify the CSV input file you want to use.

ma-cal-generator.exe ..\input-files\calibration_data_input_example_add_75.csv

In both cases the output file will be located in MagAlpha-Calibration-Curve-Toolbox\output-files\calibration_curve.csv.

Input file format

The input file must use the following structure. You can use a much row as you want.

Reference Angle [degree]	Measured Angle [degree]
258.047	0.703125
260.156	2.10938
262.266	3.51563
263.672	5.625
265.781	7.73438
…	…

Which gives the CSV format below.

Reference Angle [degree],Measured Angle [degree]
258.047,0.703125
260.156,2.10938
262.266,3.51563
263.672,5.625
265.781,7.73438
..., ...

Output file format

The generated output file will use the following structure.

Reference Angle	Measured Angle	Measured Angle with Zero Correction	Angle Error	Angle Error Fitting	H1	H2	H3	H4	Ph1	Ph2	Ph3	Ph4	Number of points	Corrected Angle Cst + Slope	Angle Error after fit Cst + Slope	Corrected Angle Cst + Slope Lin Search	Angle Error after fit Cst + Slope Lin Search	Corrected Angle Fitted	Angle Error after Fit
258.047	0.703125	258.75	0.0596442	-0.461852	0.779883	3.42582	0.26283	1.64956	-1.56693	-1.56693	-1.56693	-1.56693	200	259.219	-0.469254	259.219	-0.469254	259.219	-0.469254
260.156	2.10938	260.156	-0.643115	-0.477579	0.779883	3.42582	0.26283	1.64956	-1.56693	-1.56693	-1.56693	-1.56693	200	260.655	-0.498378	260.655	-0.498378	260.655	-0.498378
262.266	3.51563	261.563	-1.34685	-0.496033	0.779883	3.42582	0.26283	1.64956	-1.56693	-1.56693	-1.56693	-1.56693	200	262.09	-0.527503	262.09	-0.527503	262.09	-0.527503
263.672	5.625	263.672	-0.643481	-0.530978	0.779883	3.42582	0.26283	1.64956	-1.56693	-1.56693	-1.56693	-1.56693	200	264.243	-0.571189	264.243	-0.571189	264.243	-0.571189
265.781	7.73438	265.781	-0.643115	-0.577405	0.779883	3.42582	0.26283	1.64956	-1.56693	-1.56693	-1.56693	-1.56693	200	266.396	-0.614876	266.396	-0.614876	266.396	-0.614876
…	…	…	…	…	…	…	…	…	…	…	…	…	…	…	…	…	…	…	…

Which gives the CSV format below.

Reference Angle,Measured Angle,Measured Angle with Zero Correction,Angle Error,Angle Error Fitting,H1,H2,H3,H4,Ph1,Ph2,Ph3,Ph4,Number of points,Corrected Angle Cst + Slope,Angle Error after fit Cst + Slope,Corrected Angle Cst + Slope Lin Search,Angle Error after fit Cst + Slope Lin Search,Corrected Angle Fitted,Angle Error after Fit
258.047,0.703125,258.75,0.0596442,-0.461852,0.779883,3.42582,0.26283,1.64956,-1.56693,-1.56693,-1.56693,-1.56693,200,259.219,-0.469254,259.219,-0.469254,259.219,-0.469254
260.156,2.10938,260.156,-0.643115,-0.477579,0.779883,3.42582,0.26283,1.64956,-1.56693,-1.56693,-1.56693,-1.56693,200,260.655,-0.498378,260.655,-0.498378,260.655,-0.498378
262.266,3.51563,261.563,-1.34685,-0.496033,0.779883,3.42582,0.26283,1.64956,-1.56693,-1.56693,-1.56693,-1.56693,200,262.09,-0.527503,262.09,-0.527503,262.09,-0.527503
263.672,5.625,263.672,-0.643481,-0.530978,0.779883,3.42582,0.26283,1.64956,-1.56693,-1.56693,-1.56693,-1.56693,200,264.243,-0.571189,264.243,-0.571189,264.243,-0.571189
265.781,7.73438,265.781,-0.643115,-0.577405,0.779883,3.42582,0.26283,1.64956,-1.56693,-1.56693,-1.56693,-1.56693,200,266.396,-0.614876,266.396,-0.614876,266.396,-0.614876
...,...,...,...,...,...,...,...,...,...,...,...,...,...,...,...,...,...,...,...

Calibration curve generator

First you need to extract the harmonics components from the angle measurements.

#include "calibrationcurvegenerator.h"

//input parameters
const unsigned int sizeAngleArray = 200;         //change if needed
float referenceAngleInDegree[sizeAngleArray];    //fill with ref angle
float measuredAngleInDegree[sizeAngleArray];     //fill with sensor angle
//output parameters
float angleErrorArrayInDegree[sizeAngleArray];
float h1;
float h2;
float h3;
float h4;
float phi1;
float phi2;
float phi3;
float phi4;
extractAngleErrorHarmonics(  referenceAngleInDegree,
                             measuredAngleInDegree,
                             angleErrorArrayInDegree,
                             sizeAngleArray,
                             &h1,
                             &h2,
                             &h3,
                             &h4,
                             &phi1,
                             &phi2,
                             &phi3,
                             &phi4);

Define the lookup table size and angles to use.

//Generate the lookup table that will be use in the final application
const unsigned int lookupTableSize = 32;    //Define the lookup table size
float angleStep = 360.0/(float)lookupTableSize;
unsigned int i;
//output parameters
float lookupTableInputAngleArray[lookupTableSize];
for(i = 0;i