stm32g474 开源项目推荐（38 个）

zeruns /Synchronous-Rectification-Buck-Boost-Digital-Power-Supply-Based-on-STM32

一款基于STM32G474的四开关Buck-Boost数字电源，支持TypeC接口PD诱骗输入和DC5.5接口输入，输入/输出最高48V10A，这是我的毕业设计，现在开源出来，含原理图、PCB、程序源码、外壳3D模型等资料。

nopnop2002 /Arduino-STM32-CAN

Arduino Core STM32 示例

lxcy-tiger /FOC-Sensorless-EKF-STM32G474

无感FOC项目，采用EKF观测器、非线性磁链观测器（Nonlinear Flux Observer）或滑模观测器（SMO），MCU采用STM32G474RET6，开发板使用ST的X-NUCLEO-IHM07M1评估板，项目为Clion的CMAKE项目，可使用Clion或VSCode打开。

Jana-Marie /stm32g4xx_usb_cdc

STM32G474 USB CDC example implementation, combined with Jan Breuer's SCPI parser library v2

UF4DigitalPower /UF4DigitalPower

基于 STM32G474 的双向四管升降压数字电源 设计输入: 7V - 70V 10AMAX 输出范围: 1V - 70V， 功率拓扑: 四开关同步整流 Buck-Boost 正反向电流均可以到0-10A

UF4OVER /UF4DigitalPower

基于STM32G474的数字电源，这是上位机仓库，下位机在https://github.com/UF4DigitalPower/UF4DigitalPower

66Leslie /ElectronicsDesignContest2025_A

2025年全国大学生电子设计竞赛 A电源题 国家级二等奖软件代码 | National Second Prize, 2025 NUEDC power track: STM32G474 three-phase inverter with SPWM control, SOGI-PLL synchronization, data acquisition, and PLECS simulation models

Aleksei327 /STM32G474-Precision-Lab-Power-Supply

Precision 0–50 V programmable laboratory PSU with 1 mV/1 mA setting steps, hybrid synchronous-buck + linear regulation, STM32G474 control, INA228 metering, and layered hardware protection.

66Leslie /SVpwm_STM32G474

2025年全国大学生电子设计竞赛 A电源题 已经过验证的SVpwm方案，由于THD等指标要求，最终未选用该方案 | Verified SVPWM (space-vector PWM) on STM32G474 for three-phase inverters, from the 2025 NUEDC power track — not selected due to THD requirements

chenfangshuo /G474PulseGen

STM32G474 高精双脉冲/多脉冲发波板，支持 5.44GHz HRTIM 驱动、SCPI 远程控制与 Python 上位机。

Natchpai /LQRx-InterleavedBuck

Digitally Controlled 2-phase Interleaved Buck Converter

Aleksei327 /STM32G474-Power-Charger

Experimental STM32G474-based high-current battery charger and programmable synchronous buck converter. KiCad hardware and STM32CubeIDE firmware.

denysderihlazov /stm32g474-lora-telemetry-node

STM32G474 & RFM95W (SX1276) LoRa telemetry node (868MHz). Features FreeRTOS-based architecture, interrupt-driven radio flow, BME280 monitoring, SSD1306 OLED, and USB CDC CLI. Includes ADC+DMA battery sensing and modular firmware design for industrial telemetry.

jaszczurtd /JaszczurHAL

HAL layer for my projects

203863488-cell /NUEDC-2023A-STM32G474-Inverter

STM32G474单相逆变器控制固件｜2023全国大学生电子设计竞赛A题基础部分

im-q /ADCNN

CNN Model for MCU ADC

Simon-Hoffmann /Autonomous-Vehicle

Autonomous RC car

HE1LSING /Bidirectional-4-Switch-Buck-Boost-DCDC

基于 STM32G474 的双向四开关 Buck-Boost 数字电源，支持 200kHz 高频开关、全数字 PID 闭环与多层保护架构。

RoboticsClubatUCF /storm-motor-controller

Open-source ESC for stepper and brushless motors, designed in KiCad.

Mukesh-Yadav-4 /ECG_STRESS_DETECTION

Personalized ECG and HRV-based acute stress detection in MATLAB using subject-specific baseline normalization and LOSO validation on the WESAD benchmark (92.4% Acc, 0.95 AUC).