rx5808 话题在 GitHub 上没有填写简介，这里按 Star 数汇总最相关的热门仓库。
DIY project to create your own 5.8ghz FPV diversity basestation - based off the rx5808 receiver module. Project includes basic Arduino Nano implementation to advanced custom PCB board and introduction to digital switches 4066 chip.
ESP32 diversity video receiver - https://discord.gg/gG2sjjK
Raspberry Pi RX5808 5.8GHz video streaming server
DIY FPV lap timer for the ESP32-S3: RSSI lap timing with an RX5808 or ESP32-C5 receiver, voice lap calls, race analysis and RotorHazard integration, in any browser.
Multi-pilot FPV lap timer receiver on one ESP32-C5: 8 pilots at ~1 kHz each, native RotorHazard nodes over USB, browser lap timer. No RX5808.
PIDflight Lap Timing device firmware
ESP32-C5 firmware: drop-in RX5808 replacement for FPVGate
DIY project to create your own 5.8ghz FPV diversity basestation - based off the rx5808 receiver module. Project includes basic Arduino Nano implementation to advanced custom PCB board and introduction to digital switches 4066 chip.
RX5808 based 5.8 GHz analog video receiver module
Open ESP32-S3 FPV handheld with RivetTX, RX5808, AT7456E OSD, AMT630A snow-screen display, and ExpressLRS
Passive system for detecting and monitoring FPV drones and UAVs through radio-frequency signals. It scans analog video channels, analyzes signal strength, and generates alerts when a transmission is detected or lost.
FPV video monitor for Raspberry Pi 5 with RX5808 tuner support. Features real-time video display, channel switching, recording, and screenshots.
使用 XIAO ESP32-C5、电阻 DAC 和 C5VRX 固件构建 5.8 GHz 模拟 FPV 接收器，用于复合视频和 USB 浏览器控制。
Unofficial mod firmware for the Furious FPV True-D V3 diversity module: much faster diversity, RX TUNE, a better band scanner, ELRS VRx backpack and LM1881 sync-mod support
RotorHazard plugin: use a node as a real time 5.8 GHz spectrum analyzer (spectrum, band map, focus + IM3/IM5, captures)
FPV drone lap timer for ESP32 + RX5808: one pilot, voice, race modes, history, phone web UI. Based on PhobosLT.
PlatformIO Raceband RSSI scanner for RX5808/RC832 FPV receivers — LED indicators, a WiFi web UI with pilot reservations and a calibration wizard, and composite TV output, across Arduino/ESP32/ESP8266 boards