Gigabyte GA-Z77-DS3H rev1.1 Hackintosh
Hackintosh for Gigabyte GA-Z77-DS3H rev1.1 motherboard using macOS Monterey (version 12).
macOS Monterey is the last version that works for non-AVX2 CPUs.
Intel Z77 chipset, LGA 1155 socket.
Supports 3rd gen. (22 nm - Ivy Bridge) and 2nd gen. (32 nm - Sandy Bridge) Intel Core CPUs.
Onboard devices:
- Qualcomm Atheros AR8161 Gigabit Ethernet controller (DS3H rev1.0 has AR8151)
- Realtek ALC887-VD audio chipset
This is a minimal guide that fits my hardware configuration:
OpenCore documentation
https://dortania.github.io/OpenCore-Install-Guide/
https://dortania.github.io/docs/release/Configuration.html
https://github.com/acidanthera/VirtualSMC/blob/1.3.0/Docs/FAQ.md
Check comments in EFI/OC/config.plist
⚠️ Use GenSMBIOS to change SystemSerialNumber, MLB, SystemUUID, ROM in Root > PlatformInfo > Generic
Configuration validation: ./ocvalidate EFI/OC/config.plist
Similar systems:
BIOS Settings
BIOS: F9 (2012/09/27 latest stable), F11a (2013/11/13 latest beta - recommended)
- Save & Exit > Load Optimized Defaults
- BIOS Features
- Fast Boot > Disabled
- Execute Disable Bit > Enabled
- Intel Virtualization Technology (i.e. VT-x) > Enabled (default is Disabled)
- VT-d > Disabled (default is Enabled) (Enabled if DisableIoMapper is true in config.plist)
- OS Type > Windows 8 WHQL (default is Other OS)
- CSM Support > Never (default is Always)
- Network stack > Disabled (can interfere with AtherosE2200Ethernet.kext)
- Secure Boot > Disabled
- Peripherals
- SATA Mode Selection > AHCI (default is IDE)
- XHCI Pre-Boot Driver > Enabled
- xHCI Mode > Enabled (default is Smart Auto)
- Internal Graphics > Disabled (default is Auto)
- Intel Rapid Start Technology > Disabled
- Legacy USB Support > Disabled (default is Enabled)
- XHCI Hand-off > Enabled
- EHCI Hand-off > Enabled (default is Disabled)
- Port 60/64 Emulation > Disabled
- Trusted Computing > TPM Support > Disable
- Super IO Configuration > Serial Port A > Disabled
USB Mapping
https://github.com/corpnewt/USBMap
EFI/OC/Kexts/USBMap.kext
#######################################################
# Edit USB Ports #
#######################################################
----- XHC@14 Controller -----
[#] 1. HS01 | AppleUSB20XHCIPort | 1 (01000000) | 14100000 | Type 3
Front4 USB3
- Microsoft® LifeCam HD-5000
[#] 2. HS02 | AppleUSB20XHCIPort | 2 (02000000) | 14200000 | Type 3
Front3 USB3
- Microsoft® LifeCam HD-5000
[#] 3. HS03 | AppleUSB20XHCIPort | 3 (03000000) | 14300000 | Type 3
Back3 USB3
- Microsoft® LifeCam HD-5000
[#] 4. HS04 | AppleUSB20XHCIPort | 4 (04000000) | 14400000 | Type 3
Back4 USB3
- Microsoft® LifeCam HD-5000
----- EH02@1A Controller -----
[#] 5. PRT1 | AppleUSBEHCIPort | 1 (01000000) | 1a100000 | Type 0
- AppleUSB20Hub (HUB-1a100000)
----- HUB-1a100000 Controller -----
[#] 6. AppleUSB20HubPort | AppleUSB20HubPort | 1 (01000000) | 1a110000 | Type 0
- BRCM20702 Hub
- AppleUSB20Hub
- AppleUSB20HubPort
- Bluetooth USB Host Controller
[ ] 7. AppleUSB20HubPort | AppleUSB20HubPort | 2 (02000000) | 1a120000 | Type 0
[#] 8. AppleUSB20HubPort | AppleUSB20HubPort | 3 (03000000) | 1a130000 | Type 0
Back2 USB2
- Microsoft® LifeCam HD-5000
[#] 9. AppleUSB20HubPort | AppleUSB20HubPort | 4 (04000000) | 1a140000 | Type 0
Back1 USB2
- AppleUSB20Hub (HUB-1a140000)
[#] 10. AppleUSB20HubPort | AppleUSB20HubPort | 5 (05000000) | 1a150000 | Type 0
Back5 USB2
- Microsoft® LifeCam HD-5000
[#] 11. AppleUSB20HubPort | AppleUSB20HubPort | 6 (06000000) | 1a160000 | Type 0
Back6 USB2
- Microsoft® LifeCam HD-5000
----- EH01@1D Controller -----
[#] 12. PRT1 | AppleUSBEHCIPort | 1 (01000000) | 1d100000 | Type 0
- AppleUSB20Hub (HUB-1d100000)
----- HUB-1d100000 Controller -----
[ ] 13. AppleUSB20HubPort | AppleUSB20HubPort | 1 (01000000) | 1d110000 | Type 0
[ ] 14. AppleUSB20HubPort | AppleUSB20HubPort | 2 (02000000) | 1d120000 | Type 0
[ ] 15. AppleUSB20HubPort | AppleUSB20HubPort | 3 (03000000) | 1d130000 | Type 0
[ ] 16. AppleUSB20HubPort | AppleUSB20HubPort | 4 (04000000) | 1d140000 | Type 0
[#] 17. AppleUSB20HubPort | AppleUSB20HubPort | 5 (05000000) | 1d150000 | Type 0
Front2 USB2
- Microsoft® LifeCam HD-5000
[#] 18. AppleUSB20HubPort | AppleUSB20HubPort | 6 (06000000) | 1d160000 | Type 0
Front1 USB2
- Microsoft® LifeCam HD-5000
[ ] 19. AppleUSB20HubPort | AppleUSB20HubPort | 7 (07000000) | 1d170000 | Type 0
[ ] 20. AppleUSB20HubPort | AppleUSB20HubPort | 8 (08000000) | 1d180000 | Type 0
Populated:
XHC: 4, EH02: 1, HUB-1a100000: 5, EH01: 1, HUB-1d100000: 2
SSDT
curl -O https://raw.githubusercontent.com/Piker-Alpha/ssdtPRGen.sh/Beta/ssdtPRGen.sh
chmod +x ssdtPRGen.sh
./ssdtPRGen.sh -target 1 # 1 = Ivy Bridge
[...]
cp ~/Library/ssdtPRGen/ssdt.aml EFI/OC/ACPI/SSDT-PM.aml
Audio
Realtek ALC887-VD (my version identification is C5D69G1 GC26D2 and matches ALC887-VD)
“The ALC887-VD is an upgraded version of the ALC887 […]”
Motherboard manual:
-
Line In Jack (Blue)
The default line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.
-
Line Out Jack (Green)
The default line out jack. Use this audio jack for a headphone or 2-channel speaker.
This jack can be used to connect front speakers in a 4/5.1/7.1-channel audio configuration.
-
Mic In Jack (Pink)
The default Mic in jack. Microphones must be connected to this jack.
Possible layouts:
- 1 “Toleda ALC887, 5/6 audio ports, native: 2 inputs, 3/4 outputs+front panel+SPDIF/Optical”
- 2 “Toleda ALC887, 3 audio ports, repurposed to 5.1: 0 inputs, 3 outputs+front panel+SPDIF/Optical”
- 3 “Toleda ALC887, 3 audio ports, native: 2 inputs, 1 output+front panel+SPDIF/Optical”
- 5 “Mirone 3 ports (Pink, Green, Blue)” => not bad, Sound Preferences: Internal Speakers + Digital Out
- 7 “Mirone 5/6 ports (Gray, Black, Orange, Pink, Green, Blue)”
- 11 “InsanelyDeepak - Realtek ALC887VD”, “3 ports supported (Pink, Green, Blue) (Note : without auto-switch, you have to manually select between output/input device’s)” => headphones selected by default
- 12 “Realtek ALC887-VD for ASUS H81M-D by VictorXu” => perfect: motherboard has 3 ports, Sound Preferences: Internal Speakers (+ Internal Microphone and Line In)
- 13 “InsanelyDeepak - Realtek ALC887VD”, “5/6 ports supported (Grey, Black, Laranja, Pink, Green, Blue)”
- 17 “InsanelyDeepak - Realtek ALC887VD”, “5/6 ports supported (Grey, Black, Laranja, Pink, Green, Blue)”
- 18 “InsanelyDeepak - Realtek ALC887VD”, “5/6 ports supported (Grey, Black, Laranja, Pink, Green, Blue)”
- 20 “Realtek 887-VD AD0 for Asus Z97M-PLUS/BR by maiconjs” => motherboard has 6 ports instead of 3
- 33 “Custom by klblk for GA-Q87TN” => motherboard has 2 ports instead of 3
- 40 “Realtek 887-VD for Asus B85-ME by maiconjs” => headphones selected by default
- 50 “0th3r ALC887 for PRIME B250-PLUS” => headphones selected by default
- 52 “ALC887 for Asus PRIME Z270-P (full Rear and Front, non auto-switch) by ctich” => headphones selected by default
- 53 “ALC887 for Asus PRIME Z270-P (Rear LineOut1, Mic - LineOut2, LineIn - LineOut3 - 5.1 and Front, non auto-switch) by ctich” => headphones selected by default
- 87 “Realtek ALC887-VD GA-Z97 HD3 ver2.1 by varrtix” => motherboard has 6 ports instead of 3
- 99 “Custom by Constanta” => not bad, Sound Preferences: Internal Speakers + Digital Out
Graphics
Network
git clone https://github.com/Mieze/AtherosE2200Ethernet.git
xcodebuild -project AtherosE2200Ethernet/AtherosE2200Ethernet.xcodeproj
cp -R AtherosE2200Ethernet/build/Release/AtherosE2200Ethernet.kext EFI/OC/Kexts
TRIM
https://github.com/dortania/bugtracker/issues/298
sudo trimforce enable
Mount EFI
diskutil list
sudo diskutil mount disk0s1
Windows keyboard
System Preferences > Keyboard > Modifier Keys
Option (⌥) Key: ⌘ Command
Command (⌘) Key: ⌥ Option
License
Do whatever you like, this is public domain.
评论