Plate-Minder

Plate Minder

GitHub | Docker Hub

Please note: This project is in a very early stage of development. The API is currently very unstable and not suitable for anyone that’s not into tinkering as things evolve.

Monitor an MJPEG stream for license plates and record them.

Currently RTSP & video files can be converted to an MJPEG stream. See the config.yaml example below.

Short term goals:

• Provide better support for hardware accelleration
• Provide MQTT support for recording found plates
• Provide original image and not just the ROI
• Draw an ROI box in original image
• Multiple camera support
• Customizable base topic
• Use home assistant autodiscovery
• Storage of images where plates have been detected.
  • Customizable & tokenized file names.
• Web UI for configuration
  • Add RESTful API to manage configuration

Components

Plate minder consists of extensible and loosely coupled components.

MJPEGReadable converts a video source to MJPEG.

• RTSPMJPEGReadable converts an RTSP stream into an MJPEG stream.
• MJPEGMJPEGReadable passthrough for an MJPEG stream.
• FileMJPEGReadable converts a video file from disk into an MJPEG stream.

MJPEGToJPEG extracts JPEG images from an MJPEG stream.

ImageFilter performs pre-processing of images.

• MaskImageFilter masks out polygon shapes from an image.
• MotionImageFilter crops an image to the largest area of detected motion.

OpenALPRDetect sends JPEG images to an open-alpr-http-wrapper service and captures detected license plate information.

PlateRecorder stores/transmits captured license plate information.

• SQLitePlateRecorder stores captured license plate data in a SQLite database.
• MQTTPlateRecorder sends captured license plate date to an MQTT broker.
• FilePlateRecorder stores captured license plate images to disk.

Installation

Getting Started

The following steps assume you’re installing & configuring Plate-Minder all on the same machine.

0. Install docker & docker-compose
1. Download and extract the bare-bones configuration.
2. Within the ‘plate-minder’ folder, run

   docker-compose up -d
   

3. From the same computer, navigate to http://localhost:8080
4. Enter your RTSP sources, filters, and recorders.
5. Captured images & data will be placed in the ./data folder.

Read on if you’d like to configure it further.

docker-compose.yaml:

Plate-Minder minimally consists of two services: plate-minder & open-alpr-http-wrapper. Optionally, a plate-minder-web service can be used to help with setting up plate-minder. Below is an example docker-compose.yaml.

version: "3.9"
services:
  plate-minder:
    container_name: plate-minder
    restart: unless-stopped
    image: sclaflin/plate-minder:latest
    ports:
      - 4000:4000
    environment:
    # Set an environment variable for the container timezone.
    # See https://en.wikipedia.org/wiki/List_of_tz_database_time_zones
      - TZ=America/Chicago
    volumes:
      # Set's the docker container to the host container local time
      - ./data:/app/data
      - ./config.yaml:/app/config.yaml
  open-alpr-http-wrapper:
    container_name: open-alpr-http-wrapper
    restart: unless-stopped
    image: sclaflin/open-alpr-http-wrapper:latest
  # This service is not required, but exists to help with configuration. Once 
  # Plate-Minder has been configured, feel free to disable this service.
  plate-minder-web:
    container_name: plate-minder-web
    image: sclaflin/plate-minder-web:latest
    restart: unless-stopped
    # The default configuration assumes docker is running on the same machine 
    # you're viewing the web UI with. If you're accessing the service from a
    # different computer, you should set the PLATE_MINDER_URL to whatever host 
    # & port Plate-Minder's RESTful service is accessible from.
    environment:
      - PLATE_MINDER_URL=http://localhost:4000
    ports:
      - 8080:80

No docker-compose? Here’s some docker commands.

I can’t pretend to know the specifics of your container host or how you intend to run things. The below commands provide the bare-minimum required to get plate-minder up and running. At a minimum, you’re likely going to want some type of watch dog to keep the services running.

Given:

• Your docker host ip address is 192.168.0.1
• Your data folder is located at /plate-minder/data
• Your config.yaml file is located at /plate-minder/config.yaml

# Open ALPR HTTP Wrapper
docker run -d -p 3000:3000 --name open-alpr-http-wrapper sclaflin/open-alpr-http-wrapper:latest

# Plate-Minder
docker run -d -p 4000:4000 --name plate-minder -v /plate-minder/data:/app/data -v /plate-minder/config.yaml:/app/config.yaml sclaflin/plate-minder:latest

# Plate-Minder Web (optional)
PLATE_MINDER_URL=http://192.168.0.1:4000 docker run -d -p 8080:80 --name plate-minder-web sclaflin/plate-minder-web:latest

With the above settings, you should be able to view the web ui and configure plate-minder at http://192.168.0.1:8080.

config.yaml

Configuration of Plate-Minder itself is handled through config.yaml. Minimally, this can be an empty file if you intend to configure it via the plate-minder-web service. Below is a complete config.yaml example:

sources:
  # Have an RTSP stream?
  - type: rtsp
    name: Northbound
    url: 'rtsp://<your camera>'
    # How often an image should be captured. 
    # Increments are in seconds. Fractional values (i.e. "0.5") can be used for
    # sub-second capturing.
    captureInterval: 1
    # By default, plate-minder will restart a source if it ends with an error 
    # code. Setting alwaysRestart to true will restart a source whether it ends
    # with an error code or not.
    alwaysRestart: false
  # Have an MJPEG stream?
  - type: mjpeg
    name: Garage
    url: 'rtsp://<your camera>'
    captureInterval: 1
    alwaysRestart: false
  # Have a video file you want to process?
  - type: file
    name: Southbound
    file: ./<path to your video file>
    captureInterval: 1
    alwaysRestart: false

# Globally applied filters
# Filter jpeg frames. Currently 'motion' and 'mask' filters are available.
# Filters are processed in the order they are defined
filters:
  # Masks out a portion of the frame. Note that any pixels within the mask
  # cannot be used for detection.
  - type: mask
    # Optional. Outputs an image to the './data' path
    # debug: true
    shapes:
      # Shapes are a series of x/y coordinates
      - 1267,0,1920,0,1920,100,1267,100 # Timestamp, top right
  # Crops the frame down to the largest area of motion detection
  - type: motion
    # Optional. Outputs an image to the './data' path
    # debug: true
  
openALPR:
  # Path to ALPRToHTTP server
  url: http://open-alpr-http-wrapper:3000/detect
  # OpenALPR supports the following country codes:
  #   "au" => Australia
  #   "auwide" => Australia Wide
  #   "br" => Brazil
  #   "br2" => Brazil Two Line
  #   "eu" => Europe
  #   "fr" => France
  #   "gb" => United Kingdom
  #   "in" => India
  #   "kr" => South Korea
  #   "kr2" => South Korea Two Line
  #   "mx" => Mexico
  #   "sg" => Singapore
  #   "us" => United States
  #   "vn2" => Vietnam Two Line
  countryCode: 'us'
  # Attempts to match the plate number against a plate pattern
  # (e.g. md for Maryland, ca for California)
  # OpenALPR supports the following pattern codes based on the selected country
  # See: https://github.com/openalpr/openalpr/tree/master/runtime_data/postprocess
  pattern: 'ca' # optional

# Record detected license plate information
recorders:
  # Output to a SQLite database
  - type: sqlite
  # Output to an MQTT host
  - type: mqtt
    url: <URL to your MQTT instance>
    # Optional - Default base topic is 'plate-minder'
    baseTopic: plate-minder
    # Optional - Home Assistant Auto Discovery support.
    hassDiscovery:
      enable: true
      discoveryPrefix: homeassistant
    # Connection options can be found here: 
    # https://github.com/mqttjs/MQTT.js#client
    mqttOptions:
      username: username
      password: mypassword
  # Output files to a folder
  - type: file
    # Naming pattern of files to store.
    # Tokens ({{DATE}}, {{TIME}}, {{SOURCE}}, and {{PLATE}}) are replaced with
    # dynamic values.
    pattern: './data/images/{{DATE}}/{{SOURCE}}/{{TIME}}_{{PLATE}}.jpeg'
    # Files older than retainDays will be removed.
    retainDays: 30

# RESTful service to alter this yaml file. Please note that this service
# will end up stripping out the comments.
restService:
  # Defaults to true
  enable: true
  # Port # for the service to run on.
  port: 4000

Usage

SQLite

Enabling the sqlite recorder will save the detected plate information into a SQLite database file (./data/database.db). Reporting & analytics queries can be run against it.

MQTT

Enabling the MQTT recorder will publish detected plate information to the plate-minder base topic. The following subtopics are available:

plate-minder/detect contains a JSON string containing the most recent detection info:

{
  "epoch_time": 1640031280937,
  "results": [
    {
      "plate": "ABC123",
      "confidence": 89.232658,
      "matches_template": 0,
      "plate_index": 0,
      "region": "",
      "region_confidence": 0,
      "processing_time_ms": 18.699596,
      "requested_topn": 10,
      "coordinates": [
        {
          "x": 510,
          "y": 516
        },
        {
          "x": 698,
          "y": 516
        },
        {
          "x": 698,
          "y": 611
        },
        {
          "x": 508,
          "y": 611
        }
      ],
      "candidates": [
        {
          "plate": "ABC123",
          "confidence": 89.232658,
          "matches_template": 0
        }
      ]
    }
  ]
}

plate-minder/<source name>/plate contains the most recently detected plate number.

plate-minder/<source name>/image contains a JPEG image of the most recently detected plate number.

plate-minder/<source name>/roi contains a cropped JPEG image of the region of interest where the plate was detected.

plate-minder/<source name>/timestamp contains the epoch timestamp (includes milliseconds) of the plate detection.

File

Enabling the file recorder will store images with a plate detected to disk. A customizable dynamic file path is used to keep the images organized.

Given:

1. a source name of “Southbound”
2. a date of “2021-12-25”, a time of “1:30:27.123PM”
3. a detected plate number of “ABC123”
4. a file pattern of ./data/images/{{DATE}}/{{SOURCE}}/{{TIME}}_{{PLATE}}.jpeg

The resulting file path would be:

./data/images/2021_12_25/Southbound/13_13_27_123_ABC123.jpeg

retainDays Sets the number of days images should be kept. After expiring, images and their folders will be removed automatically.

Home Assistant

Assuming Plate-Minder is sending data to your MQTT broker, the following entites should be auto-discovered per video source:

Please note that entities will not appear until the first license plate has been detected.

• sensor.<Source_Name>_plate
• camera.<Source_Name>_image
• camera.<Source_Name>_roi
• sensor.<Source_Name>_timestamp
• image.<Source_Name>_image
• image.<Source_Name>_roi

Picture entity card & entities card examples:

Hardware Acceleration

Intel Quicksync

1. Add the /dev/dri/renderD128 device to your docker-compose.yaml file.

   plate-minder:
     ...
     devices:
       # For Intel related hardware acceleration
       - /dev/dri/renderD128
   

2. Determine the group that /dev/dri/renderD128 belongs to:

   $ ls -l /dev/dri/renderD128 
   crw-rw----+ 1 root render 226, 128 Jan 24 23:03 /dev/dri/renderD128
   

   In the above case, the device belongs to the “render” group.
3. Get the group id:

   $ getent group render 
   render:x:107:
   

   In the above case, the group id is “107”.
4. Set the group id that the docker container user will run as.

   plate-minder:
     ...
     # For Intel related hardware acceleration, the container needs the same
     # group id as /dev/dri/renderD128.
     user: 1000:107
   

5. Set preInputArgs and preOutputArgs for each video source you have set in your config.yaml:

   sources:
     ...
     - type: rtsp
       ...
       # FFMPEG arguments to apply before the input argument. This can be used for
       # several things. In this example, we are leveraging Intel's QuickSync for
       # hardware decoding of an h264 stream.
       preInputArgs:
         - -hwaccel
         - qsv
         - -c:v
         - h264_qsv
       # FFMPEG arguments to apply before the output argument. This can be used for
       # several things. In this example, we are leveraging Intel's Quicksync for
       # hardware encoding of the MJPEG stream.
       preOutputArgs:
         - -c:v
         - mjpeg_qsv
   

Nvidia NVENC

TODO: Find a kind soul with the appropriate hardware willing to work this out.

AMD

TODO: Find a kind soul with the appropriate hardware willing to work this out.

Common Problems

The plate-minder container keeps crashing. What do?

The plate-minder process runs internally as uid 1000 and not as root. This is for your security. This is also usually why things are going poorly.

Any volumes you mount in the container that plate-minder writes to need to be writable by uid 1000. The best way to do this is to set uid 1000 as the owner of those volumes.

For example, if you want to mount /path/to/plate-minder/data, you need to first make sure that the path actually exists. Next you need to make sure it’s owned by uid 1000:

chown 1000 /path/to/plate-minder/data

The web UI is just an empty page.

Plate Minder’s web UI is written against the latest versions of web-browsers. Please update your browser and try again.

The web UI loads, but there’s an error dialog that says “Failed to fetch”.

The most likely reasons are:

• You are trying to view the web UI from a different computer and didn’t update the PLATE_MINDER_URL environment variable in your docker-compose.yaml file.
• The plate-minder service isn’t running.
• Your feet stink.
• Two of these reasons are inappropriate.

RTSP Stream is not loading

If you’re certain you’ve got the camera configured correctly, give this a shot. Some users have reported issues with getting an RTSP stream working. For them, forcing FFMPEG to use TCP solves their issue.

Add the following preInputArgs to the camera source:

sources:
	...
    - type: rtsp
    ...
    # FFMPEG arguments to apply before the input argument. This can be used
    # for several things. In this example, we are forcing ffmpeg to use tcp
    # on the camera's RTSP stream.
    preInputArgs:
        - -rtsp_transport
        - tcp

Thanks

This project has been a pleasure to develop due largely to standing on the shoulders of giants.

• Docker
• FFMPEG
• jellyfin-ffmpeg
• Git
• MQTT.js
• node.js
• node-sqlite
• node-sqlite3
• npm
• OpenALPR
• OpenCV
• Sharp
• VSCode