hl

hl

High-performance log viewer and processor that transforms logs in JSON and logfmt formats into a human-readable output. Built with efficiency in mind, it enables quick parsing and analysis of large log files with minimal overhead.

Features overview

• Automatic Pager Integration: Automatically integrates with a pager for enhanced convenience, defaulting to less if available, but fully supporting any compatible pager.
• Log Streaming Mode: Enable log streaming with the -P flag, which disables the pager.
• Field-Based Filtering: Filter log records by key/value pairs using the -f option, with support for hierarchical keys.
• Level Filtering: Easily filter logs by level with the -l option.
• Timestamp Range Filtering: Filter logs by timestamp range using the --since and --until options with intuitive formats:
  • RFC-3339 timestamp format.
  • Current configured timestamp output format (via the -t option or environment variable).
  • User-friendly shortcuts like today, yesterday, friday, or relative offsets such as -3h or -14d.
• Field Visibility Control: Quickly hide or reveal specific fields using the -h option.
• Empty Field Hiding: Automatically hide empty fields with the -e flag.
• Field Expansion: Control multi-line field and message formatting with the -x option:
  • never: Compact single-line output with escaped newlines.
  • inline: Preserve newlines as-is in the output.
  • auto: Automatically expand fields containing multi-line content.
  • always: Expand all fields into structured multi-line format.
• High-Speed Message Sorting: Achieve lightning-fast message sorting with automatic indexing via the -s flag.
  • Performs the initial scan at approximately 2 GiB/s, enabling rapid filtering by timestamp and level without re-scanning.
  • Efficiently handles hundreds of local files totaling hundreds of gigabytes.
  • Reindexes large, growing files at speeds up to roughly 10 GiB/s by skipping unmodified blocks.
• Live Follow Mode: Use the -F flag for live, timestamp-sorted message updates across multiple sources, with a preview of recent messages via the --tail option.
• Complex Query Support: Construct custom queries with logical conditions (AND/OR) and additional advanced filtering options.
• Non-JSON Prefix Handling: Process logs with non-JSON prefixes using the --allow-prefix flag.
• Timezone Flexibility: Displays timestamps in UTC by default while allowing effortless timezone switching with the -Z option or local timezone adjustments using the -L flag.
• Customizability and Themes: Fully customizable through configuration files and environment variables, with support for easy theme switching and custom themes.

Performance comparison chart

Performance comparison with humanlog, hlogf and fblog on a 2.3 GiB log file

• See performance section for more details.

Installation options

macOS

• Install using homebrew on macOS

  brew install hl
  

Other options

• Download and extract using curl and tar on macOS

  curl -sSfL https://github.com/pamburus/hl/releases/latest/download/hl-macos.tar.gz | tar xz
  

• Install using cargo

  cargo install --locked --git https://github.com/pamburus/hl.git
  

• Download latest release from download page

Linux

• Download and extract using curl and tar on Linux (x86_64)

  curl -sSfL https://github.com/pamburus/hl/releases/latest/download/hl-linux-x86_64-musl.tar.gz | tar xz
  

• Install hl package from Arch Linux extra repository

  pacman -S hl
  

Other options

• Download and extract using curl and tar on Linux (arm64/aarch64)

  curl -sSfL https://github.com/pamburus/hl/releases/latest/download/hl-linux-arm64-musl.tar.gz | tar xz
  

• Install using cargo

  cargo install --locked --git https://github.com/pamburus/hl.git
  

Windows

• Install from Scoop

  scoop bucket add pamburus https://github.com/pamburus/scoop-bucket.git
  scoop install hl
  

[!IMPORTANT] Currently, hl does not provide a built-in pager and relies on external pagers such as less. However, the build for Windows referenced on the original download page and distributed in the WinGet package manager does not work as expected. The authors state that they have not tested or verified this build and suggest that you use it at your own risk. Unfortunately, this build breaks some ANSI escape sequences and does not work properly with hl and many other programs that use ANSI escape sequences for colors and styles. It is recommended to install less from the Scoop or Chocolatey package manager. If you are using Scoop and install hl by running scoop install hl, it already installs less automatically as a dependency. Just make sure you do not have any other conflicting installations by running where less in cmd or Get-Command less in powershell.

• Download latest release from download page

Other options

• Install using cargo

  cargo install --locked --git https://github.com/pamburus/hl.git
  

NixOS

• Run using nix

  nix run github:pamburus/hl
  

  or binary package

  nix run github:pamburus/hl#bin
  

  or install with nix profile:

  nix profile add github:pamburus/hl
  

  or binary package

  nix profile add github:pamburus/hl#bin
  

• Install the package from source using nix-flakes

  Example how to update nix configuration

  {
    inputs = {
      nixpkgs.url = "github:NixOS/nixpkgs/nixos-25.05";
      hl.url = "github:pamburus/hl";
    };
    outputs = {nixpkgs, hl, ...}:
    let
      system = "x86_64-linux";
    in
    {
      # this is just an example!
      nixosConfigurations.yourHost = nixpkgs.lib.nixosSystem {
        inherit system;
        modules = [
          ({...}: {
            environment.systemPackages = [
              hl.packages.${system}
            ];
          })
        ];
      };
    };
  }
  

• Install the package with pre-built binaries using nix-flakes

  Example how to update nix configuration

  {
    inputs = {
      nixpkgs.url = "github:NixOS/nixpkgs/nixos-25.05";
      hl.url = "github:pamburus/hl";
    };
    outputs = {nixpkgs, hl, ...}:
    let
      system = "x86_64-linux";
    in
    {
      # this is just an example!
      nixosConfigurations.yourHost = nixpkgs.lib.nixosSystem {
        inherit system;
        modules = [
          ({...}: {
            environment.systemPackages = [
              hl.packages.${system}.bin
            ];
          })
        ];
      };
    };
  }
  

Examples

Screenshot

See other screenshots

Features and usage

Concatenation of multiple log files

• Concatenate all log files

  Command

  hl *.log
  

  Concatenates and displays all *.log files found in the current directory.

Support for compressed (bzip2, gzip, xz, zstd) log files

• Concatenate all log files including compressed log files

  Command

  hl $(ls -tr /var/log/example/*.{log,log.gz,log.zst,s})
  

  Concatenates and displays all *.log, *.log.gz, *.log.zst and *.s (will detect compression) files found in /var/log/example/.

Automatic usage of pager

• Use the default pager with the default parameters

  Command

  hl example.log
  

  Automatically opens less pager with the default parameters.

• Override options for default pager

  Command

  LESS=-SR hl example.log
  

  Opens less pager with disabled line wrapping.

• Use custom pager

  Command

  PAGER="most -w" hl example.log
  

  Opens most pager with -w option.

Quick filtering by log level

• Errors only

  Command

  hl -l e
  

  Displays only error log level messages.

• Errors and warnings

  Command

  hl -l w
  

  Displays only warning and error log level messages.

• Errors, warnings and informational

  Command

  hl -l i
  

  Displays all log messages except debug level messages.

Using live log streaming

• Command

  tail -f example.log | hl -P
  

  Tracks changes in the example.log file and displays them immediately. Flag -P disables automatic using of pager in this case.

Filtering by field values

• Command

  hl example.log --filter component=tsdb
  

  Displays only messages where the component field has the value tsdb.

• Command

  hl example.log -f component!=tsdb -f component!=uninteresting
  

  Displays only messages where the component field exists and has a value other than tsdb or uninteresting.

• Command

  hl example.log -f provider~=string
  

  Displays only messages where the provider field contains the string sub-string.

• Command

  hl example.log -f 'provider!~=string'
  

  Displays only messages where the provider field exists and does not contain the string sub-string.

• Command

  hl example.log -f 'request.method?!=GET'
  

  Displays only messages where the request.method field does not exist or exists and is not equal to GET. In JSON messages, this also matches composite fields, e.g., {"request":{"method":"POST"}}.

• Command

  hl example.log -f 'span.[].name=sp0001'
  

  Displays only messages where the span field is an array that contains an object with a name field equal to sp0001.

• Command

  hl example.log -f 'span.[1].name=sp0001'
  

  Displays only messages where the span field is an array with at least two elements, and the element at index 1 (i.e., the second element) is an object with a name field equal to sp0001.

Performing complex queries

• Command

  hl my-service.log --query 'level > info or status-code >= 400 or duration > 0.5'
  

  Displays messages that either have a level higher than info (i.e. warning or error) or have a status code field with a numeric value >= 400 or a duration field with a numeric value >= 0.5.

• Command

  hl my-service.log -q '(request in (95c72499d9ec, 9697f7aa134f, bc3451d0ad60)) or (method != GET)'
  

  Displays all messages that have the ‘request’ field with one of these values, or the ‘method’ field with a value other than ‘GET’.

• Command

  hl my-service.log -q '.price?=3'
  

  Displays messages where the price field equals 3 OR the price field is absent. The ? modifier after a field name includes records that don’t have that field. Without the ? modifier, filtering on a missing field will skip the record.

• Command

  hl my-service.log -q '.status?!=error'
  

  Displays messages where the status field is not equal to error OR the status field is absent. This is useful to include records that may not have a status field at all.

• Command

  hl my-service.log -q 'exists(.price)'
  

  Displays only messages that have the price field, regardless of its value. The exists() operator tests for field presence without any value comparison.

• Command

  hl my-service.log -q 'exists(msg) and msg~=warning'
  

  Displays messages that have a msg field that exists AND contains the substring warning. This combines field existence checking with value matching.

• Command

  hl my-service.log -q 'not exists(.internal)'
  

  Displays messages that do NOT have an internal field, effectively filtering out records with that field.

• Complete set of supported operators

  • Logical operators
    • Logical conjunction - and, &&
    • Logical disjunction - or, ||
    • Logical negation - not, !
  • Comparison operators
    • Equal - eq, =
    • Not equal - ne, !=
    • Greater than - gt, >
    • Greater or equal - ge, >=
    • Less than - lt, <
    • Less or equal - le, <=
  • String matching operators
    • Sub-string check - (contain, ~=), (not contain, !~=)
    • Wildcard match - (like), (not like)
      • Wildcard characters are: * for zero or more characters and ? for a single character
    • Regular expression match - (match, ~~=), (not match, !~~=)
  • Operators with sets
    • Test if a value is one of the values in a set - in (v1, v2), not in (v1, v2)
    • Test if a value is one of the values in a set loaded from a file - in @filename, not in @filename, assuming that each element is a line in the file, which can be either a simple string or a JSON string
    • Test if a value is one of the values in a set loaded from stdin - in @-, not in @-
  • Field existence operators
    • Test if a field exists - exists(.field) or exist(.field) (both forms are supported)

• Notes

  • Include Absent Modifier (?): When appending ? to a field name (e.g., .field?=value), the filter will match both:

    • Records where the field exists and matches the condition
    • Records where the field is absent (does not exist)

    This is useful in logfmt or similar formats where fields may be optional. Without the ? modifier, records with a non-existent field are excluded from the results.

  • Special field names that are reserved for filtering by predefined fields regardless of the actual source field names used to load the corresponding value: level, message, caller and logger.

  • To address a source field with one of these names instead of predefined fields, add a period before its name, i.e., .level will perform a match against the “level” source field.

  • To address a source field by its exact name, use a JSON-formatted string, i.e. -q '".level" = info'.

  • To specify special characters in field values, also use a JSON-formatted string, i.e.

    hl my-service.log -q 'message contain "Error:\nSomething unexpected happened"'
    

Filtering by time range

• Command

  hl example.log --since 'Jun 19 11:22:33' --until yesterday
  

  Displays only messages that occurred after Jun 19 11:22:33 UTC of the current year (or the previous year if the current date is less than Jun 19 11:22:33) and before yesterday midnight.

• Command

  hl example.log --since -3d
  

  Displays only messages from the past 72 hours.

• Command

  hl example.log --until '2021-06-01 18:00:00' --local
  

  Displays only messages that occurred before 6 PM local time on June 1, 2021, and shows timestamps in local time.

Hiding or revealing selected fields

• Command

  hl example.log --hide provider
  

  Hides field provider.

• Command

  hl example.log --hide '*' --hide '!provider'
  

  Hides all fields except provider.

• Command

  hl example.log -h headers -h body -h '!headers.content-type'
  

  Hides fields headers and body but shows a single sub-field content-type inside field headers.

Sorting messages chronologically

• Command

  hl -s *.log
  

  Displays log messages from all log files in the current directory sorted in chronological order.

Sorting messages chronologically with following the changes

• Command

  hl --sync-interval-ms 500 -F <(kubectl logs -l app=my-app-1 -f) <(kubectl logs -l app=my-app-2 -f)
  

  Runs without a pager in follow mode by merging messages from the outputs of these 2 commands and sorting them chronologically within a custom 500ms interval.

• Command

  hl -F --tail 100 app1.log app2.log app3.log
  

  Runs without a pager in follow mode, following the changes in three log files in the current directory and sorting them chronologically at a default interval of 100ms. Preloads 100 lines from the end of each file before filtering.

Configuration files

• Configuration files are automatically loaded if found in predefined platform-specific locations.

  OS	System-Wide Location	User Profile Location
  macOS	/etc/hl/config.{yaml,toml,json}	~/.config/hl/config.{yaml,toml,json}
  Linux	/etc/hl/config.{yaml,toml,json}	~/.config/hl/config.{yaml,toml,json}
  Windows	%PROGRAMDATA%\hl\config.{yaml,toml,json}	%USERPROFILE%\AppData\Roaming\hl\config.{yaml,toml,json}

• The path to the configuration file can be overridden using the HL_CONFIG environment variable or the --config command-line option.

  The order in which the configuration files are searched and loaded is as follows:

  1. The system-wide location.
  2. The user profile location.
  3. The location specified by the HL_CONFIG environment variable (unless the --config option is used).
  4. The locations specified by the --config option (can be specified multiple times).

  If a configuration file is found in multiple locations, the file in each subsequent location overrides only the parameters it contains.

  If HL_CONFIG or --config specifies - or an empty string, all default locations and any locations specified by previous --config options are discarded. The search for the configuration file locations starts over.

  To disable loading of configuration files and use the built-in defaults, --config - can be used.

• All parameters in the configuration file are optional and can be omitted. In this case, default values are used.

Default configuration file

• config.toml

Environment variables

• Many parameters that are defined in command line arguments and configuration files can also be specified by environment variables.

Precedence of configuration sources (from lowest priority to highest priority)

• Configuration file
• Environment variables
• Command-line arguments

Environment variables examples

• HL_TIME_FORMAT='%y-%m-%d %T.%3N' overrides the time format specified in the configuration file.
• HL_TIME_ZONE=Europe/Berlin overrides the time zone specified in the configuration file.
• HL_CONCURRENCY=4 overrides the concurrency limit specified in the configuration file.
• HL_PAGING=never specifies the default value for the paging option, but it can be overridden by command line arguments.

Themes

Stock themes

• themes

Selecting current theme

• Using theme value in the configuration file.
• Using environment variable, i.e. HL_THEME=classic, overrides the value specified in configuration file.
• Using command-line argument, i.e. --theme classic, overrides all other values.

Theme overlays

Theme overlays allow you to apply multiple theme modifications on top of your base theme and main configured theme, enabling compositional theming. Overlays are merged in order: @base → configured theme → overlays (in list order).

• Configure overlays in your configuration file using the theme-overlays setting:

  theme: "uni"
  theme-overlays: ["@accent-italic"]
  

• Overlays are regular theme files that can customize specific aspects without replacing the entire theme

• Overlays are applied in the specified order, allowing fine-grained control over theme composition

• Empty array [] or omitting theme-overlays means no overlays are applied

• Overlay themes are typically tagged with overlay and excluded from default theme listings (use --list-themes=overlay to view them)

Selecting themes with preview

To select themes with preview fzf tool can be used like this:

hl --list-themes | fzf --color='bg+:23,gutter:-1,pointer:210' --highlight-line --preview-window 'right,border-left,88%,<142(up,88%,border-bottom)' --preview="hl -t '%b %d %T' --input-info minimal -c --theme {} sample/*.log"

Custom themes

For complete theme configuration reference, see Theme Configuration Guide.

• Custom themes are automatically loaded when found in a predefined platform-specific location.

  OS	Location
  macOS	~/.config/hl/themes/*.{yaml,yml,toml,json}
  Linux	~/.config/hl/themes/*.{yaml,yml,toml,json}
  Windows	%USERPROFILE%\AppData\Roaming\hl\themes*.{yaml,yml,toml,json}

• Structure

  • version (required): Must be "1.0"
  • tags (optional): Theme classification and filtering
    • Classification tags: dark, light, 16color, 256color, truecolor
    • Special tags: base (foundation themes, excluded from default listings), overlay (composition themes, excluded from default listings)
    • Use --list-themes=base or --list-themes=overlay to show themes with these tags
    • Theme names starting with @ (e.g., @base, @accent-italic) are a naming convention; filtering is based on tags, not name prefixes
  • styles (optional): Reusable role-based styles that can inherit from each other
  • elements (optional): Visual styles for specific log elements
  • levels (optional): Per-level overrides for elements
  • indicators (optional): Sync indicator styling for --follow mode

• Example

  version = "1.0"
  tags = ["dark", "256color"]
  
  # Reusable styles with inheritance
  [styles]
  primary = { modes = ["-faint"] }
  secondary = { style = "primary", modes = ["faint"] }
  warning = { style = "primary", foreground = "yellow" }
  error = { style = "primary", foreground = "bright-red" }
  
  # Element-specific styles can reference roles
  [elements]
  message = { style = "primary", modes = ["bold"] }
  time = { style = "secondary" }
  level-inner = { style = "primary" }
  
  # Level-specific overrides
  [levels.warning]
  level-inner = { style = ["primary", "warning"] }
  message = { style = ["primary", "warning"] }
  
  [levels.error]
  level-inner = { style = ["primary", "error"] }
  message = { style = ["primary", "error"] }
  

• Roles (predefined): default, primary, secondary, strong, muted, accent, accent-secondary, message, syntax, status, key, value, level, trace, debug, info, warning, error

• Elements (predefined): input, input-number, input-number-inner, input-name, input-name-inner, time, level, level-inner, logger, logger-inner, caller, caller-inner, message, message-delimiter, field, key, array, object, string, number, boolean, boolean-true, boolean-false, null, ellipsis

• Mode operations:

  • +mode or mode: Add mode (e.g., ["+bold"] or ["bold"])
  • -mode: Remove inherited mode (e.g., ["-faint"])
  • Last occurrence wins for conflicts (e.g., ["+bold", "-bold"] removes bold)

• Inheritance chain: @base theme → user theme’s styles → element’s style field → element’s explicit properties

  • All themes inherit from built-in @base theme
  • Styles can reference other styles via style field
  • Elements can reference styles via style field
  • Explicit properties override inherited ones

• Color format:

  • Keyword default for terminal default color
  • ASCII basic color names: black, red, green, yellow, blue, magenta, cyan, white, bright-black, bright-red, bright-green, bright-yellow, bright-blue, bright-magenta, bright-cyan, bright-white
  • 256-color palette code: 0 to 255
  • RGB hex format: #RRGGBB (e.g., #FFFF00 for bright yellow)

• Modes: bold, faint, italic, underline, slow-blink, rapid-blink, reverse, conceal, crossed-out

Used terminal color schemes

iTerm2

• One Dark Neo
• Built-in “Light Background” color scheme

Alacritty

• One Dark Neo
  • Note: It is recommended to use draw_bold_text_with_bright_colors: true setting
• Light
  • Note: It is recommended to use draw_bold_text_with_bright_colors: false setting

Complete set of options and flags

JSON and logfmt log converter to human readable representation

Usage: hl [OPTIONS] [FILE]...

Arguments:
  [FILE]...  Files to process

Options:
      --config <FILE>                    Configuration file path [env: HL_CONFIG=]
  -s, --sort                             Sort entries chronologically
  -F, --follow                           Follow input streams and sort entries chronologically within time frame set by --sync-interval-ms option
      --tail <N>                         Number of last entries to preload from each file in --follow mode [default: 10]
      --sync-interval-ms <MILLISECONDS>  Synchronization interval for live streaming mode enabled by --follow option [default: 100]
      --paging <WHEN>                    Control pager usage (HL_PAGER or PAGER) [env: HL_PAGING=] [default: auto] [possible values: auto, always, never]
  -P                                     Handful alias for --paging=never, overrides --paging option
      --help[=<VERBOSITY>]               Print help [possible values: short, long]
  -V, --version                          Print version

Filtering Options:
  -l, --level <LEVEL>    Display entries with level >= <LEVEL> [env: HL_LEVEL=]
      --since <TIME>     Display entries with timestamp >= <TIME>
      --until <TIME>     Display entries with timestamp <= <TIME>
  -f, --filter <FILTER>  Filter entries by matching field values [k=v, k~=v, k~~=v, 'k!=v', 'k?!=v', etc]
  -q, --query <QUERY>    Filter entries using a query expression ['status>=400 or duration>=15', etc]

Output Options:
      --color [<WHEN>]        Whether to use ANSI colors and styles [env: HL_COLOR=] [default: auto] [possible values: auto, always, never]
  -c                          Handful alias for --color=always, overrides --color option
      --theme <THEME>         Color theme [env: HL_THEME=] [default: uni]
  -r, --raw                   Output raw source entries instead of formatted entries
      --no-raw                Disable raw source entries output, overrides --raw option
      --raw-fields            Output field values as is, without unescaping or prettifying
  -h, --hide <KEY>            Hide or reveal fields with the specified keys, prefix with ! to reveal, provide '!*' to reveal all
      --flatten <WHEN>        Whether to flatten objects [env: HL_FLATTEN=] [default: always] [possible values: never, always]
  -t, --time-format <FORMAT>  Time format, see https://man7.org/linux/man-pages/man1/date.1.html [env: HL_TIME_FORMAT=] [default: "%Y-%m-%d %T.%3N"]
  -Z, --time-zone <TZ>        Time zone name, see column "TZ identifier" at https://en.wikipedia.org/wiki/List_of_tz_database_time_zones [env: HL_TIME_ZONE=] [default: UTC]
  -L, --local                 Use local time zone, overrides --time-zone option
      --no-local              Disable local time zone, overrides --local option
  -e, --hide-empty-fields     Hide empty fields, applies for null, string, object and array fields only [env: HL_HIDE_EMPTY_FIELDS=]
  -E, --show-empty-fields     Show empty fields, overrides --hide-empty-fields option [env: HL_SHOW_EMPTY_FIELDS=]
      --input-info <LAYOUTS>  Input number and filename layouts [default: auto] [possible values: auto, none, minimal, compact, full]
      --ascii [<WHEN>]        Whether to restrict punctuation to ASCII characters only [env: HL_ASCII=] [default: auto] [possible values: auto, never, always]
  -x, --expansion [<MODE>]    Whether to expand fields and messages [env: HL_EXPANSION=] [default: auto] [possible values: never, inline, auto, always]
  -o, --output <FILE>         Output file
      --output-delimiter <D>  Output entry delimiter [env: HL_OUTPUT_DELIMITER=] [default: newline] [possible values: newline, nul]

Input Options:
      --input-format <FORMAT>       Input format [env: HL_INPUT_FORMAT=] [default: auto] [possible values: auto, json, logfmt]
      --unix-timestamp-unit <UNIT>  Unix timestamp unit [env: HL_UNIX_TIMESTAMP_UNIT=] [default: auto] [possible values: auto, s, ms, us, ns]
      --allow-prefix                Allow non-JSON prefixes before JSON log entries [env: HL_ALLOW_PREFIX=]
      --delimiter <DELIMITER>       Log entry delimiter [env: HL_DELIMITER=] [default: auto] [possible values: auto, cr, lf, crlf, newline, nul]

Advanced Options:
      --interrupt-ignore-count <N>  Number of interrupts to ignore, i.e. Ctrl-C (SIGINT) [env: HL_INTERRUPT_IGNORE_COUNT=] [default: 3]
      --buffer-size <SIZE>          Buffer size [env: HL_BUFFER_SIZE=] [default: "256 KiB"]
      --max-message-size <SIZE>     Maximum log entry size [env: HL_MAX_MESSAGE_SIZE=] [default: "64 MiB"]
  -C, --concurrency <N>             Number of processing threads [env: HL_CONCURRENCY=]
      --shell-completions <SHELL>   Print shell auto-completion script and exit [possible values: bash, elvish, fish, powershell, zsh]
      --man-page                    Print man page and exit
      --list-themes[=<TAGS>]        Print available themes optionally filtered by tags [possible values: 

提示：代码过长已自动截断

Performance

• MacBook Pro (16-inch, 2021)

  • CPU: Apple M1 Max CPU

  • OS: macOS Tahoe 26.2

  • Data: ~ 2.3 GiB log file, 6 000 000 lines

    • hl v0.35.2 ~ 1.1 seconds

      $ time hl --config - example.log -c -o /dev/null
      hl --config - example.log -c -o /dev/null  9.33s user 0.45s system 922% cpu 1.060 total
      

    • hl with -x always flag v0.35.2 ~ 1.2 seconds

      $ time hl --config - example.log -c -x always -o /dev/null
      hl --config - example.log -c -x always -o /dev/null  11.19s user 0.50s system 936% cpu 1.248 total
      

    • hlogf v1.4.1 ~ 8.8 seconds

      $ time hlogf example.log --color always >/dev/null
      hlogf example.log --color always > /dev/null  6.79s user 2.05s system 100% cpu 8.787 total
      

    • humanlog v0.8.9 ~ 123 seconds

      $ time humanlog <example.log --color always >/dev/null
      humanlog --color always < example.log > /dev/null  136.18s user 7.17s system 116% cpu 2:03.25 total
      

    • fblog v4.17.0 ~ 34 seconds

      $ time fblog example.log >/dev/null
      fblog example.log > /dev/null  31.92s user 2.39s system 99% cpu 34.327 total
      

    • fblog with -d flag v4.17.0 ~ 164 seconds

      $ time fblog -d example.log >/dev/null
      fblog -d example.log > /dev/null  147.57s user 16.20s system 99% cpu 2:43.82 total
      

  • See #132 for how to repeat measurements