EtherSia

EtherSia

A minimal IPv6 library for an Arduino with an ENC28J60, W5500 or W5100 Ethernet controller.

Features

• SLAAC (Neighbour Discovery Protocol / Stateless Auto-configuration)
• HTTP Server
• UDP Client and Server
• DNS Client

Design Decisions

1. Optimised for Arduino - not a general purpose library
2. Should be easy to use - this is what Arduino is all about
3. Should work within the constraints of an Uno - 32k ROM and 2k RAM
4. Should follow the Style Guide and avoid using complex C features like Pointers and Callbacks
5. Decouple the core from protocols where possible, to allow for program size optimisations
6. Only use statically allocated memory to avoid leaks and keep memory usage down

Limitations

• Ethernet only
• No DHCPv6
• No Routing or RPL
• No TCP Client
• Stateless TCP in HTTP Server (single packet request/response)
• No fragmentation support
• A single local router on the network is assumed
• The network prefix length is assumed to be /64

If you need a more fully functional IPv6 stack, then take a look at Contiki.

EtherSia is an IPv6 only library. If you are looking for an IPv4 library for ENC28J60, then take a look at EtherCard.

Compatibility

EtherSia should work on any Arduino board with ENC28J60, W5500 or W5100 based network interface. There are the results of boards I have tested with:

Board	Class	Tested?	CS Pin	Hardware MAC Address
Arduino Ethernet Shield	EtherSia_W5100	Working	10	None
Arduino Ethernet Shield 2	EtherSia_W5500	Working	10	None
Nanode v5	EtherSia_ENC28J60	Working	8	UNI/O 11AA02E48
Nanode RF / Classic	EtherSia_ENC28J60	-	8	MCP79411
Nano Shield	EtherSia_ENC28J60	Working	10	None
Velleman KA04/VMA04	EtherSia_ENC28J60	-	10	None
Ciseco Ethernet Shield K016	EtherSia_ENC28J60	-	10	None
Snootlab Gate 0.5	EtherSia_ENC28J60	-	10	None
Testing on Linux	EtherSia_LinuxSocket	Working	-	-

License: 3-clause BSD license