bkcrack

bkcrack

Crack legacy zip encryption with Biham and Kocher’s known plaintext attack.

Overview

A ZIP archive may contain many entries whose content can be compressed and/or encrypted. In particular, entries can be encrypted with a password-based symmetric encryption algorithm referred to as traditional PKWARE encryption, legacy encryption or ZipCrypto. This algorithm generates a pseudo-random stream of bytes (keystream) which is XORed to the entry’s content (plaintext) to produce encrypted data (ciphertext). The generator’s state, made of three 32-bits integers, is initialized using the password and then continuously updated with plaintext as encryption goes on. This encryption algorithm is vulnerable to known plaintext attacks as shown by Eli Biham and Paul C. Kocher in the research paper A known plaintext attack on the PKZIP stream cipher. Given ciphertext and 12 or more bytes of the corresponding plaintext, the internal state of the keystream generator can be recovered. This internal state is enough to decipher ciphertext entirely as well as other entries which were encrypted with the same password. It can also be used to bruteforce the password with a complexity of n^l-6 where n is the size of the character set and l is the length of the password.

bkcrack is a command-line tool which implements this known plaintext attack. The main features are:

• Recover internal state from ciphertext and plaintext.
• Remove or change a ZIP archive’s password using the internal state.
• Recover the original password from the internal state.

Install

Precompiled packages

You can get the latest official release on GitHub.

Precompiled packages for Ubuntu, MacOS and Windows are available for download. Extract the downloaded archive wherever you like.

On Windows, Microsoft runtime libraries are needed for bkcrack to run. If they are not already installed on your system, download and install the latest Microsoft Visual C++ Redistributable package.

Compile from source

Alternatively, you can compile the project with CMake.

First, download the source files or clone the git repository. Then, running the following commands in the source tree will create an installation in the install folder.

cmake -S . -B build -DCMAKE_INSTALL_PREFIX=install
cmake --build build --config Release
cmake --build build --config Release --target install

Third-party packages

bkcrack is available in the package repositories listed below. Those packages are provided by external maintainers.

Usage

List entries

You can see a list of entry names and metadata in an archive named archive.zip like this:

bkcrack -L archive.zip

Entries using ZipCrypto encryption are vulnerable to a known-plaintext attack.

Recover internal keys

The attack requires at least 12 bytes of known plaintext. At least 8 of them must be contiguous. The larger the contiguous known plaintext, the faster the attack.

Load data from zip archives

Having a zip archive encrypted.zip with the entry cipher being the ciphertext and plain.zip with the entry plain as the known plaintext, bkcrack can be run like this:

bkcrack -C encrypted.zip -c cipher -P plain.zip -p plain

Load data from files

Having a file cipherfile with the ciphertext (starting with the 12 bytes corresponding to the encryption header) and plainfile with the known plaintext, bkcrack can be run like this:

bkcrack -c cipherfile -p plainfile

Offset

If the plaintext corresponds to a part other than the beginning of the ciphertext, you can specify an offset. It can be negative if the plaintext includes a part of the encryption header.

bkcrack -c cipherfile -p plainfile -o offset

Sparse plaintext

If you know little contiguous plaintext (between 8 and 11 bytes), but know some bytes at some other known offsets, you can provide this information to reach the requirement of a total of 12 known bytes. To do so, use the -x flag followed by an offset and bytes in hexadecimal.

bkcrack -c cipherfile -p plainfile -x 25 4b4f -x 30 21

Decipher

If the attack is successful, the deciphered data associated to the ciphertext used for the attack can be saved:

bkcrack -c cipherfile -p plainfile -d decipheredfile

If the keys are known from a previous attack, it is possible to use bkcrack to decipher data:

bkcrack -c cipherfile -k 12345678 23456789 34567890 -d decipheredfile

Decompress

The deciphered data might be compressed depending on whether compression was used or not when the zip file was created. If deflate compression was used, a Python 3 script provided in the tools folder may be used to decompress data.

python3 tools/inflate.py < decipheredfile > decompressedfile

Remove password

To get access to all the entries of the encrypted archive in a single step, you can generate a new archive with the same content but without encryption. It assumes that every entry was originally encrypted with the same password.

bkcrack -C encrypted.zip -k 12345678 23456789 34567890 -D decrypted.zip

Change password

It is also possible to generate a new encrypted archive with the password of your choice:

bkcrack -C encrypted.zip -k 12345678 23456789 34567890 -U unlocked.zip new_password

You can also define the new password by its corresponding internal representation.

bkcrack -C encrypted.zip -k 12345678 23456789 34567890 --change-keys unlocked.zip 581da44e 8e40167f 50c009a0

Those two commands can be used together to change the contents of an encrypted archive without knowing the password but knowing only the internal keys: you can make a copy encrypted with the password of you choice, then edit the copy with an archive manager entering the chosen password when prompted, and finally make a copy of the modified archive back with the original encryption keys.

Recover password

Given the internal keys, bkcrack can try to find the original password.

Bruteforce password recovery

You can look for a password using characters in a given charset:

bkcrack -k 1ded830c 24454157 7213b8c5 -b ?p

You can restrict the search to passwords of a given length or a range of lengths:

bkcrack -k 1ded830c 24454157 7213b8c5 -b ?p -l 9
bkcrack -k 1ded830c 24454157 7213b8c5 -b ?p -l 8..10

Option -r <length> <charset> is a shortcut for -l 0..<length> -b <charset>:

bkcrack -k 1ded830c 24454157 7213b8c5 -r 10 ?p

Mask-based password recovery

If you have some knowledge about how the password is formed, you can specify a mask to restrict the search space and make the recovery much faster. This is relevant for long passwords (such as those with 12 or more characters) for which bruteforce becomes very time-consuming.

For example, assuming you vaguely remember that your password is made of 8 lowercase letters, an hyphen and 6 decimal digits, you can use this command:

bkcrack -k 1940e266 d3fd3d89 71ce9871 -m ?l?l?l?l?l?l?l?l-?d?d?d?d?d?d

This runs in milliseconds, whereas the bruteforce alternative takes hours.

Character sets

The search space for both bruteforce and mask-based password recovery is defined with charsets. A charset is a sequence of characters or shortcuts for existing charsets. Predefined charsets are listed below.

Shortcut	Description	Value
?l	lowercase letters	abcdefghijklmnopqrstuvwxyz
?u	uppercase letters	ABCDEFGHIJKLMNOPQRSTUVWXYZ
?d	decimal digits	0123456789
?s	special characters	!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~
?a	alpha-numerical characters	same as ?l?u?d
?p	printable ASCII characters	same as ?l?u?d?s
?b	all bytes	0x00 … 0xff

In addition to predefined charsets, you can define custom charsets with the -s option. Custom charsets can reference predefined charsets or other custom charsets. Custom charsets are especially useful for precise specification of the mask-based recovery search space.

For example, if you know your password is made of 10 letters (uppercase or lowercase) and 5 binary digits, you can use this command:

bkcrack -k b8c377a6 f603160f 1832a78b -m ?x?x?x?x?x?x?x?x?x?x?y?y?y?y?y -s x ?u?l -s y 01

Learn

A tutorial is provided in the example folder.

For more information, have a look at the documentation and read the source.

Contribute

Do not hesitate to suggest improvements or submit pull requests on GitHub.

If you would like to show your support to the project, you are welcome to make a donation or sponsor the project via Github Sponsors.

License

This project is provided under the terms of the zlib/png license.