khoih-prog/WiFiWebServer：这是一个简单但完整的WebServer库，适用于基于WiFi

项目介绍

khoih-prog/WiFiWebServer 是一个托管在 GitHub 上的开源项目，主要使用 C++ 编写，采用 MIT License 许可证，目前获得 104 个 Star、22 次 Fork。

仓库全名: khoih-prog/WiFiWebServer

README 摘要

WiFiWebServer Table of Contents Why do we need this WiFiWebServer library Features Currently Supported Boards Currently supported WiFi shields/modules Changelog Prerequisites Installation Use Arduino Library Manager Manual Install VS Code & PlatformIO Packages' Patches 1. For Adafruit nRF52840 and nRF52832 boards 2. For Teensy boards 3. For Arduino SAM DUE boards 4. For Arduino SAMD boards For core version v1.8.10+…

完整内容见 GitHub 原始 README 或本页。

常见问题

WiFiWebServer 用什么语言开发？

主要使用 C++ 编写，采用 MIT License 许可证，目前有 104 个 Star。

WiFiWebServer 可以免费商用吗？

如何获取 WiFiWebServer 的源码？

可以直接克隆仓库：git clone https://github.com/khoih-prog/WiFiWebServer.git；安装与运行步骤见仓库 README。

WiFiWebServer 最近还在维护吗？

仓库最近一次更新为 2022年12月5日，当前没有未关闭的 Issue；Star 数为 104，可作为社区活跃度的参考。

关于

GitHub 原始描述（英文）

This is simple yet complete WebServer library for AVR, Portenta_H7, Teensy, SAM DUE, SAMD, STM32, RP2040-based, etc. boards running WiFi modules/shields (WiFiNINA, CYW43439, U-Blox W101, W102, etc.). The functions are similar and compatible to ESP8266/ESP32 WebServer libraries to make life much easier to port sketches from ESP8266/ESP32. Now using WiFiMulti_Generic library

cyw43439 esp32 esp8266 nano-33-iot nano-rp2040-connect nrf52 portentah7 raspberry-pi-pico-w rp2040 sam-due samd samdue stm32 tcp teensy webserver wifi wifi-multi-generic wifi101-generic wifinina

MIT License
104 Stars
22 Forks
104 Watching

描述取自 GitHub 官方 API，保持仓库作者书写的原文。

简要分析

热度分

252

价值分

活跃状态

归档

GitHub

语言占比

C++

Shell

Why do we need this WiFiWebServer library

Features

This WiFiWebServer library is a simple yet complete WebServer library for AVR, Portenta_H7, Teensy, SAM DUE, Arduino SAMD21, Adafruit SAMD21/SAMD51, Adafruit nRF52, ESP32/ESP8266, STM32F/L/H/G/WB/MP1, etc. boards, using WiFi modules/shields (WiFiNINA, WiFi101, U-Blox W101, W102, ESP8266/ESP32-AT, etc.).

The functions are similar and compatible to those of ESP32 WebServer and ESP8266WebServer libraries to make life much easier to port sketches from ESP8266/ESP32.

This WiFiWebServer library, from v1.1.0, also provides high-level HTTP and WebSocket Client with the functions are similar and compatible to those of ArduinoHttpClient Library

The library provides supports to:

WiFi Client, STA and AP mode
TCP Server and Client
UDP Server and Client
HTTP Server and Client
HTTP GET and POST requests, provides argument parsing, handles one client at a time.
High-level HTTP (GET, POST, PUT, PATCH, DELETE) and WebSocket Client. From v1.1.0.

It is based on and modified from:

The WiFiWebServer class found in WiFiWebServer.h header, is a simple web server that knows how to handle HTTP requests such as GET and POST and can only support one client at a time.

The newly-created WiFiMulti-related examples in WiFiMulti demonstrate how to use the new WiFiMulti_Generic library to connect to the best of multi-WiFi APs, with auto-checking / auto-reconnecting features when WiFi connection is lost.

Currently Supported Boards

This WiFiWebServer library currently supports these following boards:

SAM DUE
SAMD21

Arduino: ZERO, MKR, NANO_33_IOT, etc.
Adafruit SAMD21 (M0) : ItsyBitsy M0, Feather M0, Feather M0 Express, Metro M0 Express, Circuit Playground Express, Trinket M0, PIRkey, HalloWing M0, Crickit M0, etc.
Seeeduino: LoRaWAN, Zero, Femto M0, XIAO M0, Wio GPS Board, etc.

SAMD51

Adafruit SAMD51 (M4) : Metro M4, Grand Central M4, ItsyBitsy M4, Feather M44 Express, Trellis M4, Metro M4 AirLift lite, MONSTER M4SK Express, Hallowing EM4 xpress, etc.
Seeeduino: Wio Terminal, Grove UI Wireless

Teensy (4.1, 4.0, 3.6, 3.5, 3,2, 3.1, 3.0, LC)
All STM32F/L/H/G/WB/MP1 with more than 32KB flash memory.
AVR Mega1280, 2560, ADK, 32U4, 16U4, etc. using Arduino, Adafruit or Sparkfun core. To use patch for ArduinoSTL library.
RP2040-based boards, such as Nano RP2040 Connect, or RASPBERRY_PI_PICO_W with CYW43439 WiFi, using Arduino-mbed RP2040 core or Earle Philhower’s arduino-pico core
RP2040-based boards, such as RASPBERRY_PI_PICO, ADAFRUIT_FEATHER_RP2040 and GENERIC_RP2040, using Arduino-mbed RP2040 core or Earle Philhower’s arduino-pico core.
ESP32

ESP32 boards, such as ESP32_DEV, etc.
ESP32S2-based boards, such as ESP32S2_DEV, ESP32_S2 Saola, etc.
ESP32C3-based boards, such as ESP32C3_DEV, etc. New
ESP32_S3 (ESP32S3_DEV, ESP32_S3_BOX, UM TINYS3, UM PROS3, UM FEATHERS3, etc.) New

ESP8266
Portenta_H7
nRF52 boards, such as AdaFruit Feather nRF52832, nRF52840 Express, BlueFruit Sense, Itsy-Bitsy nRF52840 Express, Metro nRF52840 Express, NINA_B302_ublox, NINA_B112_ublox, etc.
Arduino megaAVR boards using Arduino core

UNO WiFi Rev2 : WiFi101 New
Nano Every : WiFiEspAT New

CO2 Ampel

SAMD : WiFi101 New

STM32 using STM32duino Maple core. New
Sparkfun SAMD

SAMD21, SAMD51 : WiFiEspAT New

Industruino SAMD

D21G : WiFiEspAT New

Tlera Corp STM32WB boards

Firefly-WB55RG, Nucleo-WB55RG, etc. : WiFiEspAT New

Maixduino boards

Sipeed Maixduino, etc. : WiFiEspAT New

RTL8720DN using Realtek AmebaD core New
Arduino, Sparkfun, Adafruit, etc. AVR boards (Mega, 32U4, etc.). To use patch for ArduinoSTL library New

Arduino Uno / Mega / Duemilanove / Diecimila / LilyPad / Mini / Fio / Nano, etc.
Arduino ATMega 16U4, 32U4 such as AVR Leonardo, Leonardo ETH, YUN, Esplora, LILYPAD_USB, AVR_ROBOT_CONTROL, AVR_ROBOT_MOTOR, AVR_INDUSTRIAL101, etc.
Adafruit ATMega 32U4 such as AVR_FLORA8, AVR_FEATHER32U4, AVR_CIRCUITPLAY, AVR_ITSYBITSY32U4_5V, AVR_ITSYBITSY32U4_3V, AVR_BLUEFRUITMICRO, AVR_ADAFRUIT32U4, etc.
Adafruit ATMega 328(P) such as AVR_METRO, AVR_FEATHER328P, AVR_PROTRINKET5, AVR_PROTRINKET3, AVR_PROTRINKET5FTDI, AVR_PROTRINKET3FTDI, etc.
Generic or Sparkfun AVR ATmega_32U4 such as AVR_MAKEYMAKEY, AVR_PROMICRO, etc.
Generic or Sparkfun AVR ATmega_328(P) such as ARDUINO_REDBOT, ARDUINO_AVR_DIGITAL_SANDBOX, etc.
Generic or Sparkfun AVR ATmega128RFA1 such as ATMEGA128RFA1_DEV_BOARD, etc.

Currently supported WiFi shields/modules

WiFiNINA using WiFiNINA_Generic library
WiFi101 using WiFi101_Generic library New
u-blox W101, W102 using WiFiNINA_Generic library
ESP8266-AT command using WiFiEspAT library
ESP8266/ESP32-AT command using ESP_AT_Lib library
Built-in WiFi of ESP32, ESP8266
Built-in WiFi of Portenta_H7
Built-in CYW43439 WiFi of RASPBERRY_PI_PICO_W New

Prerequisites

Arduino IDE 1.8.19+ for Arduino.
ESP32 Core 2.0.5+ for ESP32-based boards.
ESP8266 Core 3.0.2+ for ESP8266-based boards. .
Arduino AVR core 1.8.6+ for Arduino (Use Arduino Board Manager) for AVR boards.
Teensy core v1.57+ for Teensy (4.1, 4.0, 3.6, 3.5, 3,2, 3.1, 3.0) boards.
Arduino SAM DUE core v1.6.12+ for SAM DUE ARM Cortex-M3 boards.
Arduino SAMD core 1.8.13+ for SAMD ARM Cortex-M0+ boards.
Adafruit SAMD core 1.7.11+ for SAMD ARM Cortex-M0+ and M4 boards (Nano 33 IoT, etc.).
Seeeduino SAMD core 1.8.3+ for SAMD21/SAMD51 boards (XIAO M0, Wio Terminal, etc.).
Adafruit nRF52 v1.3.0+ for nRF52 boards such as Adafruit NRF52840_FEATHER, NRF52832_FEATHER, NRF52840_FEATHER_SENSE, NRF52840_ITSYBITSY, NRF52840_CIRCUITPLAY, NRF52840_CLUE, NRF52840_METRO, NRF52840_PCA10056, PARTICLE_XENON, NINA_B302_ublox, etc.
Arduino Core for STM32 v2.3.0+ for STM32F/L/H/G/WB/MP1 boards.
Earle Philhower's arduino-pico core v2.6.3+ for RP2040-based boards such as RASPBERRY_PI_PICO, RASPBERRY_PI_PICO_W, ADAFRUIT_FEATHER_RP2040 and GENERIC_RP2040, etc.
ArduinoCore-mbed mbed_rp2040, mbed_nano, mbed_portenta core 3.4.1+ for Arduino (Use Arduino Board Manager) Portenta_H7, RP2040-based boards, such as Nano_RP2040_Connect, RASPBERRY_PI_PICO.
Arduino megaAVR core 1.8.7+ for Arduino megaAVR boards such as UNO_WIFI_REV2, NANO_EVERY
Functional-Vlpp library v1.0.2+ to use server’s lambda function. To install, check
WiFiNINA_Generic library v1.8.15-1+ if using WiFiNINA. To install, check .
ESP_AT_Lib library v1.4.1+ if using ESP8288/ESP32-AT shields. To install, check .
WiFi101_Generic library v1.0.0+ to use SAMD MKR1000, etc. boards with WiFi101 for sending larger data. To install, check .
WiFiEspAT library v1.4.1+ if using ESP8288/ESP32-AT shields.
WiFiMulti_Generic library v1.2.2+ to use WiFiMulti function. To install, check . New

Installation

Use Arduino Library Manager

The best and easiest way is to use Arduino Library Manager. Search for WiFiWebServer, then select / install the latest version. You can also use this link for more detailed instructions.

Manual Install

Navigate to WiFiWebServer page.
Download the latest release WiFiWebServer-master.zip.
Extract the zip file to WiFiWebServer-master directory
Copy the whole WiFiWebServer-master folder to Arduino libraries’ directory such as ~/Arduino/libraries/.

VS Code & PlatformIO:

Install VS Code
Install PlatformIO
Install WiFiWebServer library by using Library Manager. Search for WiFiWebServer in Platform.io Author’s Libraries
Use included platformio.ini file from examples to ensure that all dependent libraries will installed automatically. Please visit documentation for the other options and examples at Project Configuration File

Packages’ Patches

1. For Adafruit nRF52840 and nRF52832 boards

To be able to compile, run and automatically detect and display BOARD_NAME on nRF52840/nRF52832 boards, you have to copy the whole nRF52 Packages_Patches directory into Adafruit nRF52 directory (~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0).

Supposing the Adafruit nRF52 version is 1.3.0. These files must be copied into the directory:

~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/platform.txt
~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/boards.txt
~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/cores/nRF5/Udp.h
~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/cores/nRF5/Print.h
~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/cores/nRF5/Print.cpp
~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/variants/NINA_B302_ublox/variant.h
~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/variants/NINA_B302_ublox/variant.cpp
~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/variants/NINA_B112_ublox/variant.h
~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/variants/NINA_B112_ublox/variant.cpp
~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/cores/nRF5/Udp.h

Whenever a new version is installed, remember to copy these files into the new version directory. For example, new version is x.yy.z These files must be copied into the directory:

~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/platform.txt
~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/boards.txt
~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/cores/nRF5/Udp.h
~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/cores/nRF5/Print.h
~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/cores/nRF5/Print.cpp
~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/variants/NINA_B302_ublox/variant.h
~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/variants/NINA_B302_ublox/variant.cpp
~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/variants/NINA_B112_ublox/variant.h
~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/variants/NINA_B112_ublox/variant.cpp
~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/cores/nRF5/Udp.h

2. For Teensy boards

To be able to compile and run on Teensy boards, you have to copy the files in Packages_Patches for Teensy directory into Teensy hardware directory (./arduino-1.8.19/hardware/teensy/avr/boards.txt).

Supposing the Arduino version is 1.8.19. These files must be copied into the directory:

./arduino-1.8.19/hardware/teensy/avr/boards.txt
./arduino-1.8.19/hardware/teensy/avr/cores/teensy/Stream.h
./arduino-1.8.19/hardware/teensy/avr/cores/teensy3/Stream.h
./arduino-1.8.19/hardware/teensy/avr/cores/teensy4/Stream.h

Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz These files must be copied into the directory:

./arduino-x.yy.zz/hardware/teensy/avr/boards.txt
./arduino-x.yy.zz/hardware/teensy/avr/cores/teensy/Stream.h
./arduino-x.yy.zz/hardware/teensy/avr/cores/teensy3/Stream.h
./arduino-x.yy.zz/hardware/teensy/avr/cores/teensy4/Stream.h

3. For Arduino SAM DUE boards

To be able to compile and run on SAM DUE boards, you have to copy the whole SAM DUE directory into Arduino sam directory (~/.arduino15/packages/arduino/hardware/sam/1.6.12).

Supposing the Arduino SAM core version is 1.6.12. This file must be copied into the directory:

~/.arduino15/packages/arduino/hardware/sam/1.6.12/platform.txt

Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz This file must be copied into the directory:

~/.arduino15/packages/arduino/hardware/sam/x.yy.zz/platform.txt

4. For Arduino SAMD boards

To be able to compile, run and automatically detect and display BOARD_NAME on Arduino SAMD (Nano-33-IoT, etc) boards, you have to copy the whole Arduino SAMD Packages_Patches directory into Arduino SAMD directory (~/.arduino15/packages/arduino/hardware/samd/1.8.13).

For core version v1.8.10+

Supposing the Arduino SAMD version is 1.8.13. Now only one file must be copied into the directory:

~/.arduino15/packages/arduino/hardware/samd/1.8.13/platform.txt

Whenever a new version is installed, remember to copy this files into the new version directory. For example, new version is x.yy.zz

This file must be copied into the directory:

~/.arduino15/packages/arduino/hardware/samd/x.yy.zz/platform.txt

For core version v1.8.9-

Supposing the Arduino SAMD version is 1.8.9. These files must be copied into the directory:

~/.arduino15/packages/arduino/hardware/samd/1.8.9/platform.txt
~/.arduino15/packages/arduino/hardware/samd/1.8.9/cores/arduino/Arduino.h

Whenever a new version is installed, remember to copy these files into the new version directory. For example, new version is x.yy.z

These files must be copied into the directory:

~/.arduino15/packages/arduino/hardware/samd/x.yy.z/platform.txt
~/.arduino15/packages/arduino/hardware/samd/x.yy.z/cores/arduino/Arduino.h

This is mandatory to fix the notorious Arduino SAMD compiler error. See Improve Arduino compatibility with the STL (min and max macro)

 ...\arm-none-eabi\include\c++\7.2.1\bits\stl_algobase.h:243:56: error: macro "min" passed 3 arguments, but takes just 2
     min(const _Tp& __a, const _Tp& __b, _Compare __comp)

Whenever the above-mentioned compiler error issue is fixed with the new Arduino SAMD release, you don’t need to copy the Arduino.h file anymore.

5. For Adafruit SAMD boards

To be able to compile, run and automatically detect and display BOARD_NAME on Adafruit SAMD (Itsy-Bitsy M4, etc) boards, you have to copy the whole Adafruit SAMD Packages_Patches directory into Adafruit samd directory (~/.arduino15/packages/adafruit/hardware/samd/1.7.11).

Supposing the Adafruit SAMD core version is 1.7.11. These files must be copied into the directory:

~/.arduino15/packages/adafruit/hardware/samd/1.7.11/platform.txt
~/.arduino15/packages/adafruit/hardware/samd/1.7.11/cores/arduino/Print.h
~/.arduino15/packages/adafruit/hardware/samd/1.7.11/cores/arduino/Print.cpp

Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz These files must be copied into the directory:

~/.arduino15/packages/adafruit/hardware/samd/x.yy.zz/platform.txt
~/.arduino15/packages/adafruit/hardware/samd/x.yy.zz/cores/arduino/Print.h
~/.arduino15/packages/adafruit/hardware/samd/x.yy.zz/cores/arduino/Print.cpp

6. For Seeeduino SAMD boards

To be able to compile, run and automatically detect and display BOARD_NAME on Seeeduino SAMD (XIAO M0, Wio Terminal, etc) boards, you have to copy the whole Seeeduino SAMD Packages_Patches directory into Seeeduino samd directory (~/.arduino15/packages/Seeeduino/hardware/samd/1.8.3).

Supposing the Seeeduino SAMD core version is 1.8.3. These files must be copied into the directory:

~/.arduino15/packages/Seeeduino/hardware/samd/1.8.3/platform.txt
~/.arduino15/packages/Seeeduino/hardware/samd/1.8.3/cores/arduino/Arduino.h
~/.arduino15/packages/Seeeduino/hardware/samd/1.8.3/cores/arduino/Print.h
~/.arduino15/packages/Seeeduino/hardware/samd/1.8.3/cores/arduino/Print.cpp

Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz These files must be copied into the directory:

~/.arduino15/packages/Seeeduino/hardware/samd/x.yy.zz/platform.txt
~/.arduino15/packages/Seeeduino/hardware/samd/x.yy.zz/cores/arduino/Arduino.h
~/.arduino15/packages/Seeeduino/hardware/samd/x.yy.zz/cores/arduino/Print.h
~/.arduino15/packages/Seeeduino/hardware/samd/x.yy.zz/cores/arduino/Print.cpp

7. For STM32 boards

7.1 For STM32 boards to use LAN8720

For Generic STM32F4 series boards, such as STM32F407VE, using LAN8720, please use STM32 core v2.2.0 as breaking core v2.3.0 creates the compile error.

To use LAN8720 on some STM32 boards

Nucleo-144 (F429ZI, NUCLEO_F746NG, NUCLEO_F746ZG, NUCLEO_F756ZG)
Discovery (DISCO_F746NG)
STM32F4 boards (BLACK_F407VE, BLACK_F407VG, BLACK_F407ZE, BLACK_F407ZG, BLACK_F407VE_Mini, DIYMORE_F407VGT, FK407M1)

you have to copy the files stm32f4xx_hal_conf_default.h and stm32f7xx_hal_conf_default.h into STM32 stm32 directory (~/.arduino15/packages/STM32/hardware/stm32/2.2.0/system) to overwrite the old files.

Supposing the STM32 stm32 core version is 2.2.0. These files must be copied into the directory:

~/.arduino15/packages/STM32/hardware/stm32/2.2.0/system/STM32F4xx/stm32f4xx_hal_conf_default.h for STM32F4.
~/.arduino15/packages/STM32/hardware/stm32/2.2.0/system/STM32F7xx/stm32f7xx_hal_conf_default.h for Nucleo-144 STM32F7.

Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz, these files must be copied into the corresponding directory:

~/.arduino15/packages/STM32/hardware/stm32/x.yy.zz/system/STM32F4xx/stm32f4xx_hal_conf_default.h
~/.arduino15/packages/STM32/hardware/stm32/x.yy.zz/system/STM32F7xx/stm32f7xx_hal_conf_default.h

7.2 For STM32 boards to use Serial1

To use Serial1 on some STM32 boards without Serial1 definition (Nucleo-144 NUCLEO_F767ZI, Nucleo-64 NUCLEO_L053R8, etc.) boards, you have to copy the files STM32 variant.h into STM32 stm32 directory (~/.arduino15/packages/STM32/hardware/stm32/2.3.0). You have to modify the files corresponding to your boards, this is just an illustration how to do.

Supposing the STM32 stm32 core version is 2.3.0. These files must be copied into the directory:

~/.arduino15/packages/STM32/hardware/stm32/2.3.0/variants/STM32F7xx/F765Z(G-I)T_F767Z(G-I)T_F777ZIT/NUCLEO_F767ZI/variant.h for Nucleo-144 NUCLEO_F767ZI.
~/.arduino15/packages/STM32/hardware/stm32/2.3.0/variants/STM32L0xx/L052R(6-8)T_L053R(6-8)T_L063R8T/NUCLEO_L053R8/variant.h for Nucleo-64 NUCLEO_L053R8.

Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz, these files must be copied into the corresponding directory:

~/.arduino15/packages/STM32/hardware/stm32/x.yy.zz/variants/STM32F7xx/F765Z(G-I)T_F767Z(G-I)T_F777ZIT/NUCLEO_F767ZI/variant.h
~/.arduino15/packages/STM32/hardware/stm32/x.yy.zz/variants/STM32L0xx/L052R(6-8)T_L053R(6-8)T_L063R8T/NUCLEO_L053R8/variant.h

8. For RP2040-based boards using Earle Philhower arduino-pico core

8.1 To use BOARD_NAME

To be able to automatically detect and display BOARD_NAME on RP2040-based boards (RASPBERRY_PI_PICO, ADAFRUIT_FEATHER_RP2040, GENERIC_RP2040, etc) boards, you have to copy the file RP2040 platform.txt into rp2040 directory (~/.arduino15/packages/rp2040/hardware/rp2040/1.4.0).

Supposing the rp2040 core version is 1.4.0. This file must be copied into the directory:

~/.arduino15/packages/rp2040/hardware/rp2040/1.4.0/platform.txt

Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz This file must be copied into the directory:

~/.arduino15/packages/rp2040/hardware/rp2040/x.yy.zz/platform.txt

With core after v1.5.0, this step is not necessary anymore thanks to the PR Add -DBOARD_NAME=“{build.board}” #136.

8.2 To avoid compile error relating to microsecondsToClockCycles

Some libraries, such as Adafruit DHT-sensor-library, require the definition of microsecondsToClockCycles(). To be able to compile and run on RP2040-based boards, you have to copy the files in RP2040 Arduino.h into rp2040 directory (~/.arduino15/packages/rp2040/hardware/rp2040/1.4.0).

Supposing the rp2040 core version is 1.4.0. This file must be copied to replace:

~/.arduino15/packages/rp2040/hardware/rp2040/1.4.0/cores/rp2040/Arduino.h

Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz This file must be copied to replace:

~/.arduino15/packages/rp2040/hardware/rp2040/x.yy.zz/cores/rp2040/Arduino.h

With core after v1.5.0, this step is not necessary anymore thanks to the PR Add defs for compatibility #142.

9. For Portenta_H7 boards using Arduino IDE in Linux

To be able to upload firmware to Portenta_H7 using Arduino IDE in Linux (Ubuntu, etc.), you have to copy the file portenta_post_install.sh into mbed_portenta directory (~/.arduino15/packages/arduino/hardware/mbed_portenta/3.4.1/portenta_post_install.sh).

Then run the following command using sudo

$ cd ~/.arduino15/packages/arduino/hardware/mbed_portenta/3.4.1
$ chmod 755 portenta_post_install.sh
$ sudo ./portenta_post_install.sh

This will create the file /etc/udev/rules.d/49-portenta_h7.rules as follows:

# Portenta H7 bootloader mode UDEV rules

SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="035b", GROUP="plugdev", MODE="0666"

Supposing the ArduinoCore-mbed core version is 3.4.1. Now only one file must be copied into the directory:

~/.arduino15/packages/arduino/hardware/mbed_portenta/3.4.1/portenta_post_install.sh

Whenever a new version is installed, remember to copy this files into the new version directory. For example, new version is x.yy.zz

This file must be copied into the directory:

~/.arduino15/packages/arduino/hardware/mbed_portenta/x.yy.zz/portenta_post_install.sh

10. For RTL8720DN boards using AmebaD core

To avoid compile error relating to PROGMEM, you have to copy the file Realtek AmebaD core pgmspace.h into Realtek AmebaD directory (~/.arduino15/packages/realtek/hardware/AmebaD/3.1.4/cores/ambd/avr/pgmspace.h).

Supposing the Realtek AmebaD core version is 3.1.4. This file must be copied into the directory:

~/.arduino15/packages/realtek/hardware/AmebaD/3.1.4/cores/ambd/avr/pgmspace.h

Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz This file must be copied into the directory:

~/.arduino15/packages/realtek/hardware/AmebaD/x.yy.zz/cores/ambd/avr/pgmspace.h

11. For SAMD21 and SAMD51 boards using ArduinoCore-fab-sam core

To avoid compile error relating to SAMD21/SAMD51, you have to copy the file ArduinoCore-fab-sam core pgmspace.h into ArduinoCore-fab-sam samd directory (~/.arduino15/packages/Fab_SAM_Arduino/hardware/samd/1.9.0/boards.txt).

Supposing the ArduinoCore-fab-sam samd core version is 1.9.0. This file must be copied into the directory:

~/.arduino15/packages/Fab_SAM_Arduino/hardware/samd/1.9.0/boards.txt

Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz This file must be copied into the directory:

~/.arduino15/packages/Fab_SAM_Arduino/hardware/samd/x.yy.zz/boards.txt

12. For Seeeduino RP2040 boards

To be able to compile, run and automatically detect and display BOARD_NAME on Seeeduino RP2040 (XIAO RP2040, Wio RP2040 Mini) boards, you have to copy the whole Seeeduino RP2040 Packages_Patches directory into Seeeduino samd directory (~/.arduino15/packages/Seeeduino/hardware/rp2040/2.7.2).

Supposing the Seeeduino RP2040 core version is 2.7.2. These files must be copied into the directory:

~/.arduino15/packages/Seeeduino/hardware/rp2040/2.7.2/boards.txt
~/.arduino15/packages/Seeeduino/hardware/rp2040/2.7.2/variants/Seeed_XIAO_RP2040/pins_arduino.h

Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz These files must be copied into the directory:

~/.arduino15/packages/Seeeduino/hardware/samd/x.yy.zz/boards.txt
~/.arduino15/packages/Seeeduino/hardware/samd/x.yy.zz/variants/Seeed_XIAO_RP2040/pins_arduino.h

13. For Seeeduino nRF52840 boards

To be able to compile and run on Xiao nRF52840 boards, you have to copy the whole nRF52 1.0.0 directory into Seeeduino nRF52 directory (~/.arduino15/packages/Seeeduino/hardware/nrf52/1.0.0).

Supposing the Seeeduino nRF52 version is 1.0.0. These files must be copied into the directory:

~/.arduino15/packages/Seeeduino/hardware/nrf52/1.0.0/platform.txt
~/.arduino15/packages/Seeeduino/hardware/nrf52/1.0.0/cores/nRF5/Print.h
~/.arduino15/packages/Seeeduino/hardware/nrf52/1.0.0/cores/nRF5/Print.cpp
~/.arduino15/packages/Seeeduino/hardware/nrf52/1.0.0/cores/nRF5/Udp.h

Whenever a new version is installed, remember to copy these files into the new version directory. For example, new version is x.yy.z These files must be copied into the directory:

~/.arduino15/packages/Seeeduino/hardware/nrf52/x.yy.z/platform.txt
~/.arduino15/packages/Seeeduino/hardware/nrf52/x.yy.z/cores/nRF5/Print.h
~/.arduino15/packages/Seeeduino/hardware/nrf52/x.yy.z/cores/nRF5/Print.cpp
~/.arduino15/packages/Seeeduino/hardware/nrf52/x.yy.z/cores/nRF5/Udp.h

How to configure to use different WiFi Libraries

1. Modify pin-to-pin connection in WiFiNINA_Generic library

Please change the pin-to-pin connection in ~/Arduino/libraries/src/WiFiNINA_Pinout_Generic.h to match actual connection if using WiFiNINA with WiFiNINA_Generic library.

For example

#elif ( defined(NRF52840_FEATHER) || defined(NRF52832_FEATHER) || defined(NRF52_SERIES) || defined(ARDUINO_NRF52_ADAFRUIT) || \
        defined(NRF52840_FEATHER_SENSE) || defined(NRF52840_ITSYBITSY) || defined(NRF52840_CIRCUITPLAY) || defined(NRF52840_CLUE) || \
        defined(NRF52840_METRO) || defined(NRF52840_PCA10056) || defined(PARTICLE_XENON) || defined(NINA_B302_ublox) || defined(NINA_B112_ublox) )

  #warning You have to modify pin usage according to actual connection for NRF528XX
  // To define pin out for WiFiNINA here

  //#define PINS_COUNT           (60u)
  //NINA
  #define NINA_GPIO0  (26u)                             //26
  #define NINA_RESETN (27u)
  #define NINA_ACK    (28u)

  #define SPIWIFI_SS       24   //PIN_SPI1_SS            //24
  #define SPIWIFI_ACK      28   //NINA_ACK               //28 
  #define SPIWIFI_RESET    27   //NINA_RESETN            //27

2. How to select which built-in WiFi or shield to use

To use W102-based WiFiNINA, define in the sketch:

#define USE_WIFI_NINA         true

To use built-in WiFi101 or shield:

#define USE_WIFI_NINA         false
#define USE_WIFI101           true

To use MKR1000 with built-in WiFi101:

// Don't care false or true
#define USE_WIFI_NINA         false

For boards other than MKR1000, to use another WiFi library with the standard WiFi.h, such as WiFiEspAT library library

#define USE_WIFI_NINA         false

To use another WiFi library without the standard WiFi.h

For example, WiFi_XYZ library uses WiFi_XYZ.h

#define USE_WIFI_NINA         false
#define USE_WIFI_CUSTOM       true

...
//Must be placed before #include <WiFiWebServer.h>
#include <WiFi_XYZ.h>
#include <WiFiWebServer.h>

3. Important

The WiFiEsp, WiFi_Link libraries are not supported. Don’t use unless you know how to modify those libraries.
Requests to support for any custom WiFi library will be ignored. Use at your own risk.

Usage

Class Constructor

  WiFiWebServer server(80);

Creates the WiFiWebServer class object.

Parameters:

host port number: int port (default is the standard HTTP port 80)

Basic Operations

Starting the server

  void begin();

Handling incoming client requests

  void handleClient();

Disabling the server

  void close();
  void stop();

Both methods function the same

Client request handlers

  void on();
  void addHandler();
  void onNotFound();
  void onFileUpload();

Example:

  server.on("/", handlerFunction);
  server.onNotFound(handlerFunction);   // called when handler is not assigned
  server.onFileUpload(handlerFunction); // handle file uploads

Sending responses to the client

  void send();
  void send_P();

Parameters:

code - HTTP response code, can be 200 or 404, etc.

content_type - HTTP content type, like "text/plain" or "image/png", etc.

content - actual content body

Advanced Options

Getting information about request arguments

  const String & arg();
  const String & argName();
  int   args();
  bool  hasArg();

Function usage:

arg - get request argument value, use arg("plain") to get POST body

argName - get request argument name

args - get arguments count

hasArg - check if argument exist

Getting information about request headers

  const String & header();
  const String & headerName();
  const String & hostHeader();
  int   headers();
  bool  hasHeader();

Function usage:

header - get request header value

headerName - get request header name

hostHeader - get request host header if available, else empty string

headers - get header count

hasHeader - check if header exist

Authentication

  bool authenticate();
  void requestAuthentication();

Function usage:

authenticate - server authentication, returns true if client is authenticated else false

requestAuthentication - sends authentication failure response to the client

Example Usage:


  if(!server.authenticate(username, password))
  {
    server.requestAuthentication();
  }

Other Function Calls

  const String& uri(); // get the current uri
  HTTPMethod    method(); // get the current method 
  WiFiClient    client(); // get the current client
  HTTPUpload&   upload(); // get the current upload
  
  void setContentLength(); // set content length
  void sendHeader(); // send HTTP header
  void sendContent(); // send content
  void sendContent_P(); 
  void collectHeaders(); // set the request headers to collect
  void serveStatic();
  
  size_t streamFile();

Examples:

Original Examples

HTTP and WebSocket Client New Examples

WiFiMulti Examples

Example AdvancedWebServer

1. File AdvancedWebServer.ino

https://github.com/khoih-prog/WiFiWebServer/blob/9094e545cd4da8007fd321212a27a36edd2d3da2/examples/AdvancedWebServer/AdvancedWebServer.ino#L40-L327

2. File defines.h

https://github.com/khoih-prog/WiFiWebServer/blob/9094e545cd4da8007fd321212a27a36edd2d3da2/examples/AdvancedWebServer/defines.h#L12-L409

Debug Terminal Output Samples

1. AdvancedWebServer on Arduino SAMD_NANO_33_IOT using WiFiNINA_Generic Library

The following are debug terminal output and screen shot when running example AdvancedWebServer on SAMD_NANO_33_IOT with WiFiNINA using WiFiNINA_Generic Library

Starting AdvancedServer on SAMD_NANO_33_IOT
WiFiWebServer v1.10.1
[NN] ===============================
[NN] 
Used/default SPI pinout: 
[NN] MOSI:  11
[NN] MISO:  12
[NN] SCK:  13
[NN] SS:  10
[NN] ===============================
[NN] 
Used/default NINA pinout: 
[NN] NINA_GPIO0:  26
[NN] NINA_RESETN/SPIWIFI_RESET:  27
[NN] NINA_ACK:  28
[NN] SS:  10
[NN] ===============================
[NN] 
Actual final pinout to used: 
[NN] SPIWIFI_SS:  24
[NN] SLAVESELECT/SPIWIFI_SS:  24
[NN] SLAVEREADY/SPIWIFI_ACK/NINA_ACK:  28
[NN] SLAVERESET/SPIWIFI_RESET/NINA_RESETN:  27
[NN] ===============================
Connecting to WPA SSID: HueNet1
HTTP server started @ 192.168.2.118
H[WIFI] String Len = 0, extend to 2048
WiFiWebServer::handleClient: New Client
method:  GET
url:  /
search:
headerName: Host
headerValue: 192.168.2.118
headerName: Connection
headerValue: keep-alive
headerName: Cache-Control
headerValue: max-age=0
headerName: DNT
headerValue: 1
headerName: Upgrade-Insecure-Requests
headerValue: 1
headerName: User-Agent
headerValue: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/84.0.4147.89 Safari/537.36
headerName: Accept
headerValue: text/html,application/xhtml+xml,application/xml;q=0.9,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.9
headerName: Accept-Encoding
headerValue: gzip, deflate
headerName: Accept-Language
headerValue: en-GB,en-US;q=0.9,en;q=0.8
headerName: Cookie
headerValue: NINASESSIONID=0
args:
args count:  0
args:
args count:  0
Request: /
Arguments: 
Final list of key/value pairs:
WiFiWebServer::_handleRequest handle
WiFiWebServer::send1: len =  330
content =  <html><head><meta http-equiv='refresh' content='5'/><title>WiFiNINA SAMD_NANO_33_IOT</title><style>body { background-color: #cccccc; font-family: Arial, Helvetica, Sans-Serif; Color: #000088; }</style></head><body><h1>Hello from WiFiNINA</h1><h2>on SAMD_NANO_33_IOT</h2><p>Uptime: 00:00:20</p><img src="/test.svg" /></body></html>
WiFiWebServer::_prepareHeader sendHeader Conn close
WiFiWebServer::send1: write header =  HTTP/1.1 200 OK
Content-Type: text/html
Content-Length: 330
Connection: close


WiFiWebServer::sendContent: Client.write content:  <html><head><meta http-equiv='refresh' content='5'/><title>WiFiNINA SAMD_NANO_33_IOT</title><style>body { background-color: #cccccc; font-family: Arial, Helvetica, Sans-Serif; Color: #000088; }</style></head><body><h1>Hello from WiFiNINA</h1><h2>on SAMD_NANO_33_IOT</h2><p>Uptime: 00:00:20</p><img src="/test.svg" /></body></html>
WiFiWebServer::_handleRequest OK
WiFiWebServer::handleClient: Client disconnected
WiFiWebServer::handleClient: Don't keepCurrentClient
WiFiWebServer::handleClient: Client disconnected
WiFiWebServer::handleClient: New Client
method:  GET
url:  /test.svg
search:
headerName: Host
headerValue: 192.168.2.118
headerName: Connection
headerValue: keep-alive
headerName: User-Agent
headerValue: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/84.0.4147.89 Safari/537.36
headerName: DNT
headerValue: 1
headerName: Accept
headerValue: image/webp,image/apng,image/*,*/*;q=0.8
headerName: Referer
headerValue: http://192.168.2.118/
headerName: Accept-Encoding
headerValue: gzip, deflate
headerName: Accept-Language
headerValue: en-GB,en-US;q=0.9,en;q=0.8
headerName: Cookie
headerValue: NINASESSIONID=0
args:
args count:  0
args:
args count:  0
Request: /test.svg
Arguments: 
Final list of key/value pairs:
WiFiWebServer::_handleRequest handle
WiFiWebServer::send1: len =  1946
content =  <svg xmlns="http://www.w3.org/2000/svg" version="1.1" width="310" height="150">
<rect width="310" height="150" fill="rgb(250, 230, 210)" stroke-width="1" stroke="rgb(0, 0, 0)" />
<g stroke="black">
<line x1="10" y1="77" x2="20" y2="67" stroke-width="1" />
<line x1="20" y1="67" x2="30" y2="98" stroke-width="1" />
<line x1="30" y1="98" x2="40" y2="111" stroke-width="1" />
<line x1="40" y1="111" x2="50" y2="90" stroke-width="1" />
<line x1="50" y1="90" x2="60" y2="22" stroke-width="1" />
<line x1="60" y1="22" x2="70" y2="98" stroke-width="1" />
<line x1="70" y1="98" x2="80" y2="64" stroke-width="1" />
<line x1="80" y1="64" x2="90" y2="104" stroke-width="1" />
<line x1="90" y1="104" x2="100" y2="31" stroke-width="1" />
<line x1="100" y1="31" x2="110" y2="59" stroke-width="1" />
<line x1="110" y1="59" x2="120" y2="139" stroke-width="1" />
<line x1="120" y1="139" x2="130" y2="117" stroke-width="1" />
<line x1="130" y1="117" x2="140" y2="75" stroke-width="1" />
<line x1="140" y1="75" x2="150" y2="72" stroke-width="1" />
<line x1="150" y1="72" x2="160" y2="137" stroke-width="1" />
<line x1="160" y1="137" x2="170" y2="20" stroke-width="1" />
<line x1="170" y1="20" x2="180" y2="94" stroke-width="1" />
<line x1="180" y1="94" x2="190" y2="81" stroke-width="1" />
<line x1="190" y1="81" x2="200" y2="38" stroke-width="1" />
<line x1="200" y1="38" x2="210" y2="33" stroke-width="1" />
<line x1="210" y1="33" x2="220" y2="53" stroke-width="1" />
<line x1

提示：代码过长已自动截断

2. SimpleWebSocket on Arduino SAMD_NANO_33_IOT using WiFiNINA_Generic Library

The terminal output of SAMD_NANO_33_IOT with WiFiNINA using WiFiNINA_Generic Library running SimpleWebSocket example to demonstrate newly-added WebSocket Client feature.

Starting SimpleWebSocket on SAMD_NANO_33_IOT with WiFiNINA using WiFiNINA_Generic Library
WiFiWebServer v1.10.1
Connecting to SSID: HueNet1
You're connected to the network, IP = 192.168.2.98
SSID: HueNet1, Signal strength (RSSI):-24 dBm
starting WebSocket client
Sending Hello 0
Sending Hello 1
Received a message:
0 => Hello from SimpleWebSocket on SAMD_NANO_33_IOT, millis = 6642
Sending Hello 2
Received a message:
1 => Hello from SimpleWebSocket on SAMD_NANO_33_IOT, millis = 11648
Sending Hello 3
Received a message:
2 => Hello from SimpleWebSocket on SAMD_NANO_33_IOT, millis = 16655
Sending Hello 4
Received a message:
3 => Hello from SimpleWebSocket on SAMD_NANO_33_IOT, millis = 21661
Sending Hello 5
Received a message:
4 => Hello from SimpleWebSocket on SAMD_NANO_33_IOT, millis = 26668
Sending Hello 6
Received a message:
5 => Hello from SimpleWebSocket on SAMD_NANO_33_IOT, millis = 31675

3. SimpleHTTPExample on Arduino SAMD_NANO_33_IOT using WiFiNINA_Generic Library

The terminal output of SAMD_NANO_33_IOT with WiFiNINA using WiFiNINA_Generic Library running SimpleHTTPExample example to demonstrate newly-added HTTP Client feature.

Starting SimpleHTTPExample on SAMD_NANO_33_IOT with WiFiNINA using WiFiNINA_Generic Library
WiFiWebServer v1.10.1
Connecting to SSID: HueNet1
You're connected to the network, IP = 192.168.2.98
SSID: HueNet1, Signal strength (RSSI):-21 dBm
startedRequest ok
Got status code: 200
Content length is: 2263
Body returned follows:

           `:;;;,`                      .:;;:.           
        .;;;;;;;;;;;`                :;;;;;;;;;;:     TM 
      `;;;;;;;;;;;;;;;`            :;;;;;;;;;;;;;;;      
     :;;;;;;;;;;;;;;;;;;         `;;;;;;;;;;;;;;;;;;     
    ;;;;;;;;;;;;;;;;;;;;;       .;;;;;;;;;;;;;;;;;;;;    
   ;;;;;;;;:`   `;;;;;;;;;     ,;;;;;;;;.`   .;;;;;;;;   
  .;;;;;;,         :;;;;;;;   .;;;;;;;          ;;;;;;;  
  ;;;;;;             ;;;;;;;  ;;;;;;,            ;;;;;;. 
 ,;;;;;               ;;;;;;.;;;;;;`              ;;;;;; 
 ;;;;;.                ;;;;;;;;;;;`      ```       ;;;;;`
 ;;;;;                  ;;;;;;;;;,       ;;;       .;;;;;
`;;;;:                  `;;;;;;;;        ;;;        ;;;;;
,;;;;`    `,,,,,,,,      ;;;;;;;      .,,;;;,,,     ;;;;;
:;;;;`    .;;;;;;;;       ;;;;;,      :;;;;;;;;     ;;;;;
:;;;;`    .;;;;;;;;      `;;;;;;      :;;;;;;;;     ;;;;;
.;;;;.                   ;;;;;;;.        ;;;        ;;;;;
 ;;;;;                  ;;;;;;;;;        ;;;        ;;;;;
 ;;;;;                 .;;;;;;;;;;       ;;;       ;;;;;,
 ;;;;;;               `;;;;;;;;;;;;                ;;;;; 
 `;;;;;,             .;;;;;; ;;;;;;;              ;;;;;; 
  ;;;;;;:           :;;;;;;.  ;;;;;;;            ;;;;;;  
   ;;;;;;;`       .;;;;;;;,    ;;;;;;;;        ;;;;;;;:  
    ;;;;;;;;;:,:;;;;;;;;;:      ;;;;;;;;;;:,;;;;;;;;;;   
    `;;;;;;;;;;;;;;;;;;;.        ;;;;;;;;;;;;;;;;;;;;    
      ;;;;;;;;;;;;;;;;;           :;;;;;;;;;;;;;;;;:     
       ,;;;;;;;;;;;;;,              ;;;;;;;;;;;;;;       
         .;;;;;;;;;`                  ,;;;;;;;;:         
                                                         
                                                         
                                                         
                                                         
    ;;;   ;;;;;`  ;;;;:  .;;  ;; ,;;;;;, ;;. `;,  ;;;;   
    ;;;   ;;:;;;  ;;;;;; .;;  ;; ,;;;;;: ;;; `;, ;;;:;;  
   ,;:;   ;;  ;;  ;;  ;; .;;  ;;   ,;,   ;;;,`;, ;;  ;;  
   ;; ;:  ;;  ;;  ;;  ;; .;;  ;;   ,;,   ;;;;`;, ;;  ;;. 
   ;: ;;  ;;;;;:  ;;  ;; .;;  ;;   ,;,   ;;`;;;, ;;  ;;` 
  ,;;;;;  ;;`;;   ;;  ;; .;;  ;;   ,;,   ;; ;;;, ;;  ;;  
  ;;  ,;, ;; .;;  ;;;;;:  ;;;;;: ,;;;;;: ;;  ;;, ;;;;;;  
  ;;   ;; ;;  ;;` ;;;;.   `;;;:  ,;;;;;, ;;  ;;,  ;;;;

4. DweetPost on Arduino SAMD_NANO_33_IOT using WiFiNINA_Generic Library

The terminal output of SAMD_NANO_33_IOT with WiFiNINA using WiFiNINA_Generic Library running DweetPost example to demonstrate newly-added HTTP Client feature.

Starting DweetPost on SAMD_NANO_33_IOT with WiFiNINA using WiFiNINA_Generic Library
WiFiWebServer v1.10.1
Connecting to SSID: HueNet1
You're connected to the network, IP = 192.168.2.98
SSID: HueNet1, Signal strength (RSSI):-22 dBm
making POST request
Status code: 200
Response: {"this":"succeeded","by":"dweeting","the":"dweet","with":{"thing":"Hello-from-SAMD_NANO_33_IOT","created":"2020-11-17T19:55:37.378Z","content":{"sensorValue":581},"transaction":"f968ee5f-35b5-4984-ac3d-34d93fdaddbe"}}
Wait ten seconds

making POST request
Status code: 200
Response: {"this":"succeeded","by":"dweeting","the":"dweet","with":{"thing":"Hello-from-SAMD_NANO_33_IOT","created":"2020-11-17T19:55:48.925Z","content":{"sensorValue":570},"transaction":"68ee52e0-22a3-4af2-96cd-aaa53587b314"}}
Wait ten seconds

5. DweetGet on Arduino SAMD_NANO_33_IOT using WiFiNINA_Generic Library

The terminal output of SAMD_NANO_33_IOT with WiFiNINA using WiFiNINA_Generic Library running DweetGet example to demonstrate newly-added HTTP Client feature.

Starting DweetGet on SAMD_NANO_33_IOT with WiFiNINA using WiFiNINA_Generic Library
WiFiWebServer v1.10.1
Connecting to SSID: HueNet1
You're connected to the network, IP = 192.168.2.98
SSID: HueNet1, Signal strength (RSSI):-25 dBm
Making GET request
Status code: 200
Response: {"this":"succeeded","by":"getting","the":"dweets","with":[{"thing":"Hello-from-SAMD_NANO_33_IOT","created":"2020-11-17T20:06:18.905Z","content":{"sensorValue":567}}]}
"sensorValue":567
Value string: 567
Actual value: 567
Wait ten seconds
Making GET request
Status code: 200
Response: {"this":"succeeded","by":"getting","the":"dweets","with":[{"thing":"Hello-from-SAMD_NANO_33_IOT","created":"2020-11-17T20:06:18.905Z","content":{"sensorValue":567}}]}
"sensorValue":567
Value string: 567
Actual value: 567
Wait ten seconds

6. MQTTClient_Auth on Arduino SAMD_NANO_33_IOT using WiFiNINA_Generic Library

The terminal output of SAMD_NANO_33_IOT with WiFiNINA using WiFiNINA_Generic Library running MQTTClient_Auth example to demonstrate newly-added MQTT Client feature.

Starting MQTTClient_Auth on SAMD_NANO_33_IOT with WiFiNINA using WiFiNINA_Generic Library
WiFiWebServer v1.10.1
Please upgrade the firmware
Connecting to WPA SSID: HueNet1
Connected! IP address: 192.168.2.98
Attempting MQTT connection to broker.emqx.io...connected
Message Send : MQTT_Pub => Hello from MQTTClient_Auth on SAMD_NANO_33_IOT with WiFiNINA using WiFiNINA_Generic Library
Message arrived [MQTT_Pub] Hello from MQTTClient_Auth on SAMD_NANO_33_IOT with WiFiNINA using WiFiNINA_Generic Library
Message Send : MQTT_Pub => Hello from MQTTClient_Auth on SAMD_NANO_33_IOT with WiFiNINA using WiFiNINA_Generic Library
Message arrived [MQTT_Pub] Hello from MQTTClient_Auth on SAMD_NANO_33_IOT with WiFiNINA using WiFiNINA_Generic Library

7. MQTT_ThingStream on Arduino SAMD_NANO_33_IOT using WiFiNINA_Generic Library

The terminal output of SAMD_NANO_33_IOT with WiFiNINA using WiFiNINA_Generic Library running MQTT_ThingStream example to demonstrate newly-added MQTT Client feature.

Start MQTT_ThingStream on SAMD_NANO_33_IOT
Starting MQTTClient_Auth on SAMD_NANO_33_IOT with WiFiNINA using WiFiNINA_Generic Library
WiFiWebServer v1.10.1
Please upgrade the firmware
Connecting to WPA SSID: HueNet1
Connected! IP address: 192.168.2.98
***************************************
STM32_Pub
***************************************
Attempting MQTT connection to broker.emqx.io
...connected
Published connection message successfully!
Subscribed to: STM32_Sub
MQTT Message Send : STM32_Pub => Hello from MQTT_ThingStream on SAMD_NANO_33_IOT with WiFiNINA using WiFiNINA_Generic Library
MQTT Message receive [STM32_Pub] Hello from MQTT_ThingStream on SAMD_NANO_33_IOT with WiFiNINA using WiFiNINA_Generic Library
MQTT Message Send : STM32_Pub => Hello from MQTT_ThingStream on SAMD_NANO_33_IOT with WiFiNINA using WiFiNINA_Generic Library
MQTT Message receive [STM32_Pub] Hello from MQTT_ThingStream on SAMD_NANO_33_IOT with WiFiNINA using WiFiNINA_Generic Library
MQTT Message Send : STM32_Pub => Hello from MQTT_ThingStream on SAMD_NANO_33_IOT with WiFiNINA using WiFiNINA_Generic Library
MQTT Message receive [STM32_Pub] Hello from MQTT_ThingStream on SAMD_NANO_33_IOT with WiFiNINA using WiFiNINA_Generic Library

8. WebClientRepeating on RASPBERRY_PI_PICO with Custom WiFi using Custom WiFi Library

The terminal output of RASPBERRY_PI_PICO with Custom WiFi (ESP8266-AT) using Custom WiFi (WiFiEspAT) Library running WebClientRepeating example to demonstrate new RP2040-based board using Earle Philhower’s arduino-pico core

Starting WebClientRepeating on RASPBERRY_PI_PICO with Custom WiFi using Custom WiFi Library
WiFiWebServer v1.10.1
WiFi shield init done
Connecting to SSID: HueNet1
You're connected to the network, IP = 192.168.2.76
SSID: HueNet1, Signal strength (RSSI):-29 dBm
Connecting...
HTTP/1.1 200 OK
Server: nginx/1.4.2
Date: Wed, 26 May 2021 03:56:08 GMT
Content-Type: text/plain
Content-Length: 2263
Last-Modified: Wed, 02 Oct 2013 13:46:47 GMT
Connection: close
Vary: Accept-Encoding
ETag: "524c23c7-8d7"
Accept-Ranges: bytes


</wifiwebserver></wifi_xyz></wifiwebserver>

> README 内容过长，已截取前 64 KB。完整内容请前往 GitHub 仓库查看。

暂无评论

WiFiWebServer

项目介绍

README 摘要

常见问题

相关仓库

关于

简要分析

语言占比

Release

贡献者

WiFiWebServer

Table of Contents

Why do we need this WiFiWebServer library

Features

Currently Supported Boards

Currently supported WiFi shields/modules

Prerequisites

Installation

Use Arduino Library Manager

Manual Install

VS Code & PlatformIO:

Packages’ Patches

1. For Adafruit nRF52840 and nRF52832 boards

2. For Teensy boards

3. For Arduino SAM DUE boards

4. For Arduino SAMD boards

For core version v1.8.10+

For core version v1.8.9-

5. For Adafruit SAMD boards

6. For Seeeduino SAMD boards

7. For STM32 boards

7.1 For STM32 boards to use LAN8720

7.2 For STM32 boards to use Serial1

8. For RP2040-based boards using Earle Philhower arduino-pico core

8.1 To use BOARD_NAME

8.2 To avoid compile error relating to microsecondsToClockCycles

9. For Portenta_H7 boards using Arduino IDE in Linux

10. For RTL8720DN boards using AmebaD core

11. For SAMD21 and SAMD51 boards using ArduinoCore-fab-sam core

12. For Seeeduino RP2040 boards

13. For Seeeduino nRF52840 boards

How to configure to use different WiFi Libraries

1. Modify pin-to-pin connection in WiFiNINA_Generic library

2. How to select which built-in WiFi or shield to use

3. Important

Usage

Class Constructor

Basic Operations

Advanced Options

Other Function Calls

Examples:

Original Examples

HTTP and WebSocket Client New Examples

WiFiMulti Examples

Example AdvancedWebServer

1. File AdvancedWebServer.ino

2. File defines.h

Debug Terminal Output Samples

1. AdvancedWebServer on Arduino SAMD_NANO_33_IOT using WiFiNINA_Generic Library

2. SimpleWebSocket on Arduino SAMD_NANO_33_IOT using WiFiNINA_Generic Library

3. SimpleHTTPExample on Arduino SAMD_NANO_33_IOT using WiFiNINA_Generic Library

4. DweetPost on Arduino SAMD_NANO_33_IOT using WiFiNINA_Generic Library

5. DweetGet on Arduino SAMD_NANO_33_IOT using WiFiNINA_Generic Library

6. MQTTClient_Auth on Arduino SAMD_NANO_33_IOT using WiFiNINA_Generic Library

7. MQTT_ThingStream on Arduino SAMD_NANO_33_IOT using WiFiNINA_Generic Library

8. WebClientRepeating on RASPBERRY_PI_PICO with Custom WiFi using Custom WiFi Library

评论