Other

项目介绍

grblHAL/STM32F1xx 是一个托管在 GitHub 上的开源项目,主要使用 C 编写,采用 Other 许可证,目前获得 72 个 Star、45 次 Fork。

仓库全名
grblHAL/STM32F1xx
开源许可证
Other
Star 数
72
Fork 数
45
未关闭 Issue
27

README 摘要

grblHAL driver for STM32F1xx processors This driver can be built with the Web Builder. 2025-05-22: Support for 128K F103s is frozen at commit 58a1c1 due to lack of memory. Source code can be found here. 2025-01-17: Builds > 20250116 removes support for advanced gcodes from the 128K \pills to save some flash, G5, G5.1 and all canned cycles are the main ones. 2021-08-08: Added support for F103RC variant that has more…

完整内容见 GitHub 原始 README 或本页 。

常见问题

STM32F1xx 用什么语言开发?

主要使用 C 编写,采用 Other 许可证,目前有 72 个 Star。

STM32F1xx 可以免费商用吗?

仓库标注的许可证为 Other,商用前请先阅读仓库 LICENSE 文件确认授权范围。

如何获取 STM32F1xx 的源码?

可以直接克隆仓库:git clone https://github.com/grblHAL/STM32F1xx.git,默认分支为 master;安装与运行步骤见仓库 README。

STM32F1xx 最近还在维护吗?

仓库最近一次更新为 5 天前,当前有 27 个未关闭 Issue;Star 数为 72,可作为社区活跃度的参考。

关于

GitHub 原始描述(英文)

grblHAL driver for ST STM32F1xx (Redpill, Bluepill)

描述取自 GitHub 官方 API,保持仓库作者书写的原文。

简要分析

热度分
169
价值分
56
活跃状态
活跃

语言占比

Assembly
C
Linker Script
Smarty

README

grblHAL driver for STM32F1xx processors

This driver can be built with the Web Builder.

2025-05-22: Support for 128K F103s is frozen at commit 58a1c1 due to lack of memory. Source code can be found here.

2025-01-17: Builds > 20250116 removes support for advanced gcodes from the 128K *pills to save some flash, G5, G5.1 and all canned cycles are the main ones.

2021-08-08: Added support for F103RC variant that has more flash and RAM, added board map for BTT SKR MINI E3 V2.0 which has this processor and uses TMC2209 drivers in UART mode.

Note 注意

STM32F3xx Blackpill can often be used as a drop-in replacement of STM32F103 based *pills.

Loosely based on code from robomechs 6-AXIS-USBCNC-GRBL port, updated for STM32CubeIDE and the latest STM HAL drivers where appropriate.

See the Wiki-page for compiling grblHAL for instructions for how to import the project, configure the driver and compile.

Available driver options can be found here.

Note 注意

The SD card plugin requires the SPI1 port to be remapped, disabling the JTAG/SWJ programming interfaces. This will be done on the first mount operation (via a $FM system command) causing the processor to hang. A power cycle is then required to get it working again.

To reenable programming a special system command, $PGM, can be used - issue this followed by a hard reset or power cycle to do so.


2025-10-06

评论

暂无评论