EM-Fault-It-Yourself

EM-Fault It Yourself

This repository contains supplementary hardware design files and software to our paper EM-Fault It Yourself: Building a Replicable EMFI Setup for Desktop and Server Hardware. You can view it as a starting point to build your own customizable and open-source electromagnetic fault injection setup.

• emfi_station/ contains the main controller software
• marlin/ contains Marlin configuration files
• hardware/ contains hardware design files for 3D-printable parts

Detailed information can be found in the README.md files of the subdirectories.

Software

The main controller software is a Python package called emfi_station. It provides a web interface to control the XYZ stage, watch camera and sensor data and orchestrate complete electromagnetic fault injection attacks. To install the package clone this repository and run pip:

git clone 
pip install .

You can run EMFI Station using the command line:

usage: emfi-station [-h] [-i HOST] [-p PORT] [-s] [-a ATTACK_DIR] [-l LOG_DIR] [--marlin MARLIN] [--cal_cam CAL_CAM] [--pos_cam POS_CAM] [-v]

EMFI Station - Orchestrate electromagnetic fault injection attacks

options:
  -h, --help            show this help message and exit
  -i HOST, --host HOST  hostname or ip address
  -p PORT, --port PORT  http port (websocket port = http port + 1)
  -s, --simulate        simulate connection to Marlin
  -a ATTACK_DIR, --attack_dir ATTACK_DIR
                        attack scripts directory
  -l LOG_DIR, --log_dir LOG_DIR
                        log files directory
  --marlin MARLIN       (vendor_id, product_id) of Marlin board
  --cal_cam CAL_CAM     (vendor_id, product_id) of calibration camera
  --pos_cam POS_CAM     (vendor_id, product_id) of positioning camera
  -v, --verbosity       enable info log level

Attack Scripts

The EMFI Station has an interface in the form of an Attack base class (attack.py) to allow easy integration of task/attack scripts. Your own task/attack class should inherit from the base class and implement the required methods. Each class should have its own file and a unique name (name() method). You can specify a folder containing attack scripts in the command line parameters.

Troubleshooting

If you experience a select timeout while running EMFI Station under Raspbian, please try to adjust the quirks parameter of the uvcvideo kernel module:

rmmod uvcvideo
modprobe uvcvideo quirks=0x80