GNU General Public License v3.0

项目介绍

ffenix113/zigbee_home 是一个托管在 GitHub 上的开源项目,主要使用 Go 编写,采用 GNU General Public License v3.0 许可证,目前获得 670 个 Star、17 次 Fork。

仓库全名
ffenix113/zigbee_home
开源许可证
GNU General Public License v3.0
Star 数
670
Fork 数
17
未关闭 Issue
8

README 摘要

Zigbee Home Project that aims to provide similar functionality to ESPHome, but for Zigbee devices. :informationsource: Note dev branch is for experiments and exploration. It cannot be used to determine quality of resulting project. Status Extremely early development, no working parts yet. Currently work is being carried to develop CLI application. Supported devices This project is being developed based on nRF52840…

完整内容见 GitHub 原始 README 或本页 。

常见问题

zigbee_home 用什么语言开发?

主要使用 Go 编写,采用 GNU General Public License v3.0 许可证,目前有 670 个 Star。

zigbee_home 可以免费商用吗?

仓库标注的许可证为 GNU General Public License v3.0,商用前请先阅读仓库 LICENSE 文件确认授权范围。

如何获取 zigbee_home 的源码?

可以直接克隆仓库:git clone https://github.com/ffenix113/zigbee_home.git,默认分支为 develop;安装与运行步骤见仓库 README。

zigbee_home 最近还在维护吗?

仓库最近一次更新为 2月10日,当前有 8 个未关闭 Issue;Star 数为 670,可作为社区活跃度的参考。

关于

Project to provide functionality similar to ESPHome but for Zigbee instead of WiFi for nRF52, nRF53 & nRF54L

描述取自 GitHub 官方 API,中文内容由 GitRead 中文社区 编辑团队整理。

简要分析

热度分
754
价值分
411
活跃状态
活跃

语言占比

C
C++
CMake
Go
Go Template
Smarty

Release

README

Zigbee Home

Project that aims to provide similar functionality to ESPHome, but for Zigbee devices.

:information_source: Note

dev branch is for experiments and exploration. It cannot be used to determine quality of resulting project.

Status

Extremely early development, no working parts yet.

Currently work is being carried to develop CLI application.

Supported devices

This project is being developed based on nRF52840 Dongle from Nordic Semiconductors

Initial goal of the project is to support nRF52840 based devices, with expansion to nRF53 series.

Using in Home Assistant

ZHA integration can figure out device capabilities without pre-defined configuration.

Firmware provided by this project is already working on the Dongle and reporting defined values when connected through ZHA.

Zigbee2MQTT requires to define device configuration before it can be useful, so for quick set-up it is not as useful.

CLI

Go CLI application available in /cli will provide necessary options to build and upload firmware based on provided configuration.

For this to work user would need to already have nRF Connect SDK set up, with west and probably some flash tool applications available and working.

Defined flash tools are:

  • nrfutil - already working
  • mcuboot
  • west

Default configuration file called zigbee.yml will be loaded and used to configure. See bare example in cli/zigbee.yml, or original configuration definition in cli/config/device.go:Device.

To flash the board with built firmware run go run ./cli/cmd/zigbee firmware --workdir <path_to_project> flash

Users can flash built applications with nRF Connect for Desktop as well, if CLI tool is not suited for some cases.

This project needs nRF Connect SDK version 2.5.0. Other versions are not yet tested.

References

评论

暂无评论