TentacleOS

High Boy Firmware (Beta)

Languages: 🇺🇸 English | 🇧🇷 Português

This repository contains a firmware in development for the High Boy platform. Warning: this firmware is in its beta phase and is still incomplete.

Officially Supported Targets

We are expanding support for the latest Espressif chips:

Target	Status
ESP32-P4	Main Development
ESP32-C5	Main Development

Firmware Structure

Unlike basic examples with a single main.c, this project uses a modular structure organized into components, which are divided as follows:

• Drivers – Handles hardware drivers and interfaces.
• Services – Implements support functionalities and auxiliary logic.
• Core – Contains the system’s central logic and main managers.
• Applications – Specific applications that use the previous modules.

This division facilitates scalability, code reuse, and firmware organization.

See the general project architecture:

How to use this project

We recommend that this project serves as a basis for custom projects with the ESP32-P4 and ESP32-C5. To start a new project with ESP-IDF, follow the official guide: ESP-IDF Documentation - Create a new project

Initial project structure

Despite the modular structure, the project still maintains an organization compatible with the ESP-IDF build system (CMake).

Example layout:

├── CMakeLists.txt
├── components
│   ├── Drivers
│   ├── Services
│   ├── Core
│   └── Applications
├── main
│   ├── CMakeLists.txt
│   └── main.c
└── README.md

Native HLE simulator

The host-level emulation (HLE) target runs the P4 UI, LVGL, host-backed storage, and a simulated C5 SPI bridge on Linux. It is intended for UI and firmware-flow development without a connected High Boy.

Boot screen rendered by the native SDL simulator.

Requirements

• Linux
• CMake 3.16 or newer
• A C11/C++17 toolchain
• Git and the SDL2 development headers
• Internet access during the first configure, which downloads LVGL, cJSON, and GoogleTest

On Ubuntu or Debian:

sudo apt update
sudo apt install build-essential cmake git libsdl2-dev

ESP-IDF, an ESP32 toolchain, and connected High Boy hardware are not required for the native simulator.

Build and run

Run these commands from the repository root:

cmake -S tools/hle -B build
cmake --build build --target hle_interactive -j
./build/hle_interactive

The first build also converts the assets under firmware_p4/assets. After UI or firmware changes, rerun the cmake --build command and restart the simulator; reconfiguration is only needed after CMake or source-layout changes.

Controls

High Boy input	Keyboard
Directional buttons	Arrow keys or W/A/S/D
OK	Enter, keypad Enter, or Space
Back	Backspace or Escape
Exit simulator	Ctrl+Q or close the window

Storage

The simulator stores /sdcard data under /tmp/hle_storage by default. Override the location with HLE_STORAGE_PATH:

HLE_STORAGE_PATH="$HOME/.local/state/tentacleos-hle" ./build/hle_interactive

Point HLE_STORAGE_PATH at a new empty directory to exercise the firmware’s first-boot flow again.

Headless snapshots

For deterministic, headless UI snapshots:

SDL_VIDEODRIVER=dummy \
HLE_SNAPSHOT_PATH=/tmp/high-boy.ppm \
HLE_SNAPSHOT_MS=6500 \
./build/hle_interactive

The snapshot example renders for 6500 ms, writes a PPM image, and exits. It is also suitable for CI or SSH sessions without a display server.

Tests

Run the native regression suite with:

cmake --build build --target hle_tests -j
ctest --test-dir build --output-on-failure

Example: testing display output

Every *.cpp file under tools/hle/tests is compiled into hle_tests and automatically registered with GoogleTest. For example, create tools/hle/tests/test_my_ui.cpp:

#include <array>
#include <cstdint>

#include <gtest/gtest.h>

#include "hle/hle_display.h"

TEST(MyUIScreen, DrawsExpectedPixel) {
    auto &display = hle::Display::instance();
    display.fill_screen(0);

    constexpr uint16_t expected_color = 0xF81F;
    display.draw_bitmap(12, 20, 13, 21, &expected_color);

    std::array<uint16_t, hle::LCD_H_RES * hle::LCD_V_RES> framebuffer{};
    ASSERT_TRUE(display.copy_pixels_if_dirty(
        framebuffer.data(), hle::LCD_H_RES * sizeof(uint16_t)));
    EXPECT_EQ(framebuffer[(20 * hle::LCD_H_RES) + 12], expected_color);
}

Build and run only that test:

cmake --build build --target hle_tests -j
./build/hle_tests --gtest_filter=MyUIScreen.DrawsExpectedPixel

Use the same pattern for NVS, SPI bridge, input, and other host-emulated contracts. Tests that include C firmware headers should place those includes inside an extern "C" block.

Scope and limitations

The HLE covers UI and host-emulated firmware flows. Wi-Fi, Bluetooth, radio, and other physical-hardware behavior still require target testing.

How to Contribute

Contributions are what make the open-source community such an amazing place to learn, inspire, and create. Any contributions you make are greatly appreciated.

1. Fork the Project
2. Create your Feature Branch (git checkout -b feat/AmazingFeature)
3. Commit your Changes using Conventional Commits (git commit -m 'feat(scope): add some AmazingFeature')
4. Push to the Branch (git push origin feat/AmazingFeature)
5. Open a Pull Request

Please read our CONTRIBUTING.md for more details on the coding style and build process.

Code of Conduct

We are committed to providing a friendly, safe, and welcoming environment for all. Please read our Code of Conduct to understand the expectations for participating in this project.

Our Supporters

Special thanks to the partners supporting this project:

License

This project is licensed under the GNU General Public License v3.0. See the LICENSE file for details.