glodroid_manifest

Manifest for GloDroid

Free and opensource AOSP based Android for the world’s most accessible development platforms.

This version is based on Android 13.0.0 Release 11.

Supported devices:

Rockchip platform:

• PinephonePro (U-Boot only, Tow-Boot unsupported)

SUNXI platform:

• Orange PI Plus 2E (temporary unsupported)
• Orange PI PC (temporary unsupported)
• Orange PI PC Plus (temporary unsupported)
• Orange PI 3
• Pinephone
• Pinetab (temporary unsupported)

Broadcom platform:

• Raspberry PI 4b

Fetching Android sources

• Installing ‘repo’ tool:

sudo apt-get install -y python-is-python3 wget
wget -P ~/bin http://commondatastorage.googleapis.com/git-repo-downloads/repo
chmod a+x ~/bin/repo

• Cloning the GloDroid

mkdir -p GloDroid
cd GloDroid
repo init -u https://github.com/glodroid/glodroid_manifest -b master -g all,-darwin
repo sync -cq

You should install additional packages in order to build GloDroid

(Ubuntu 22.04 LTS is only supported. Building on other distributions can be done using docker)

• Install AOSP required packages.

sudo apt-get install -y git-core gnupg flex bison build-essential zip curl zlib1g-dev gcc-multilib g++-multilib libc6-dev-i386 lib32ncurses5-dev x11proto-core-dev libx11-dev lib32z1-dev libgl1-mesa-dev libxml2-utils xsltproc unzip fontconfig

• Install additional packages

sudo apt-get install -y swig libssl-dev flex bison device-tree-compiler mtools git gettext libncurses5 libgmp-dev libmpc-dev cpio rsync dosfstools kmod gdisk lz4 meson cmake libglib2.0-dev

• Install additional packages (for building mesa3d, libcamera and other meson-based components)

sudo apt-get install -y python3-pip pkg-config python3-dev ninja-build
sudo pip3 install mako jinja2 ply pyyaml

Building GloDroid

cd GloDroid
source ./build/envsetup.sh
lunch
# After that you have to select your device from the list
make images

Deploying GloDroid

After successful build you should see images.tar.gz in product output folder: (out/target/product/<name>/images.tar.gz)

Content of archive:

• Utilities: adb, fastboot. mke2fs
• Partition images: bootloader-sd.img, bootloader-emmc.img, env.img, boot.img, boot_dtbo.img, super.img
• Recovery GPT image: deploy-gpt.img
• Recovery sdcard images: deploy-sd.img, deploy-sd-for-emmc.img
• Scripts: flash-sd.sh, flash-emmc.sh

Step 1

Using any available iso-to-usb utility prepare recovery SDCARD.
In case you want to flash Android on sdcard, use deploy-sd.img
In case you want to flash Android on eMMC, use deploy-sd-for.emmc.img

Step 2

Insert recovery sdcard into the target board.
Connect microusb cable to OTG connector and your PC.
Power-up the board.

Step 3

Ensure you have installed adb package: $ sudo apt install adb (required to setup udev rules)
Run ./flash-sd.sh utility for flashing Android to sdcard or ./flash-emmc.sh for flashing Android to eMMC

After several minutes flashing should complete and Android should boot

NOTE: Monitor has to be connected to the board and powered-up during flashing!

You can find GloDroid community discord chat here.

Licensed under the Apache-2.0.