esp32_compressed_delta_ota_update

ESP32 Compressed Delta OTA Updates

About the Project

The project aims at enabling firmware update of ESP32 Over-the-Air with compressed delta binaries. Testing was done with ESP32-DevKitC v4 board.

Getting Started

Hardware Required

To run the OTA demo, you need an ESP32 dev board (e.g. ESP32-WROVER Kit) or ESP32 core board (e.g. ESP32-DevKitC). You can also try running on ESP32-S2, ESP32-C3 or ESP32-S3 dev boards and let me know how it worked out.

Prerequisites

• ESP-IDF v4.3 and above

  You can visit the ESP-IDF Programmming Guide for the installation steps.

• detools v0.49.0 and above

  Binary delta encoding in Python 3.6+. You can follow the instructions here for installation.

Usage

1. Build the example examples/http_delta_ota - idf.py build. You can use the binary built here as the base_binary.

   For example usage, a while(1) loop printing ‘Hello World!’ was added to this example to create the updated_binary.

2. To generate the patch, we need 2 application binaries, namely base_binary and updated_binary.

   detools create_patch -c heatshrink base_binary.bin updated_binary.bin patch.bin

3. Open the project configuration menu (idf.py menuconfig) go to Example Connection Configuration ->

   1. WiFi SSID: WiFi network to which your PC is also connected to.
   2. WiFi Password: WiFi password

4. In order to test the OTA demo -> examples/http_delta_ota :

   1. Flash the firmware idf.py -p PORT -b BAUD flash.
   2. Run idf.py -p PORT monitor and note down the IP assigned to your ESP module. The default port is 80.

5. After getting the IP address, send the patch binary through a HTTP Post request over cURL.

   curl -v -X POST --data-binary @- < patch.bin 192.168.201.9:80/ota

Demo Results

• Base binary: assets/v1.bin
• Updated binary: assets/v2.bin
• Patch binary: assets/patch_1_2.bin
• After successfully patching and rebooting, you can see the Hello World logs.

https://user-images.githubusercontent.com/42297532/152674614-2f4d3b9d-08d2-45bc-a3b6-29f33a191fd7.mp4

Experiments

Chip	Scenario	Base binary	Updated binary	Compressed binary patch (Heatshrink)	Patch-to-File %
ESP32	test_basic_enable_small_feature	168208	155136	11036	7.11%
ESP32	test_nvs_app_modification	190656	199824	16245	8.13%
ESP32	test_http_upgrade_with_ssl	672736	761184	138839	18.24%
ESP32	test_provisioning_upgrade_idf_patch_version	966656	924448	234096	25.32%

• As Heatshrink uses static allocation with small look-ahead buffers, it has almost no impact on heap memory.

Test Scenarios: ESP-IDF 4.4-dev (Master branch)

1. test_basic_enable_small_feature: Enabling a small feature in an update

   Base binary: Compile get-started/hello-world example

   Updated binary: Same, but disable CONFIG_VFS_SUPPORT_IO option in sdkconfig

2. test_nvs_app_modification: Changing user application flow without changing the set of libraries used

   Base binary: Compile storage/nvs_rw_value example

   Updated binary: Compile storage/nvs_rw_blob example

3. test_http_upgrade_with_ssl: Changing user application flow with new set of libraries added

   Base binary: Compile protocols/http_server/simple example

   Updated binary: Compile protocols/https_server/simple example

4. test_provisioning_upgrade_idf_patch_version: Upgrading IDF to the next patch version

   Base binary: Using IDF 4.3, compile provisioning/wifi_prov_mgr example

   Update binary: Same, but with IDF 4.3.1; sdkconfig is generated from scratch.

To-do:

• Experiments with more test scenarios, especially with bigger binaries

• Add complete workflow example

  • Currently patch is applied to the ota_0 partition rather than the factory

• Optimize Heatshrink compression parameters

  • Currently running on low memory usage mode (8, 7) and static allocation
  • Memory usage and app binary size analysis

• Binary patch with LZMA compression in detools

  • LZMA is memory-heavy but will provide a greater compression ratio for the patch

Acknowledgements & Resources

• detool: Binary delta encoding in Python 3 and C 🡒 Source | Docs
• heatshrink: An Embedded Data Compression Library 🡒 Source | Blog
• Delta updates for embedded systems 🡒 Source | Docs
• bspatch for ESP32 🡒 Source

License

Distributed under the MIT License. See LICENSE for more information.

Note: The delta component is licensed under the Apache-2.0 License. Please see components/delta/LICENSE for more information.