bambulab-studio-orca-slicer-presets

  • 默认分支main
  • 大小17.1 MB
  • 更新8月19日
在 GitHub 打开

README

Presets

Bambu Studio / Orca Slicer Presets

Welcome to the Bambu Studio / Orca Slicer Presets repository! This repository is dedicated to storing / collecting presets that have been meticulously crafted and optimized for use in 3D printing and slicing applications. Whether you’re a 3D printing enthusiast, engineer, or designer, our collection of presets aims to simplify your workflow and elevate your 3D printing experience.

Features

  • A growing collection of presets for the Bambu Studio / Orca Slicer slicer.
  • Presets are meticulously optimized for quality and print performance.
  • Regular updates and additions to the preset library.
  • Community-driven contributions and improvements.

Getting Started

  1. 🔍 Explore the presets: Browse through the preset categories (Machine, Filament and Process) and select the ones that match your 3D printing needs.
  2. 📈 Optimize your prints: Use the presets to optimize your 3D printing settings for superior print quality and efficiency.
  3. 📥 Import Presets: Import the chosen presets into your 3D slicer software by downloading the repository and dropping them into the folder respective preset folders.

Importing Preset Bundle

Tip 提示

Importing the presets became a lot easizer

Automatically

Manually:

Inductions can be found here for importing presets and show hidden files to easily access the AppData Folder on Windows.

Caution 注意

Also make sure to place the inherited presets in the folder “main/filament/inherits” also inside the respective preset folder, otherwise some presets which are based on “other” presets will not work!

🪟 Windwos

Orca Slicer

📁 Absolute Path: 
C:\Users\%USERNAME%\AppData\Roaming\OrcaSlicer\user\[NUMBER]
or
C:\Users\%USERNAME%\AppData\Roaming\OrcaSlicer\system\BBL\filament
📁 Relative Path: 
%AppData%\Roaming\OrcaSlicer\user\[NUMBER]
or
%AppData%\Roaming\OrcaSlicer\system\BBL\filament

Bambu Studio

📁 Absolute Path: 
C:\Users\%USERNAME%\AppData\Roaming\BambuStudio\user\[NUMBER]
or
C:\Users\%USERNAME%\AppData\Roaming\BambuStudio\system\BBL\filament
📁 Relative Path: 
%AppData%\Roaming\BambuStudio\user\[NUMBER]
or
%AppData%\Roaming\BambuStudio\system\BBL\filament

🐧Linux

OrcaSlicer (Flatpak)

📁 Absolute Path: 
/var/home/$USER/.var/app/io.github.softfever.OrcaSlicer/config/OrcaSlicer/user/default
or
$HOME/.var/app/io.github.softfever.OrcaSlicer/config/OrcaSlicer/user/default
📁 Relative Path: 
~/.var/app/io.github.softfever.OrcaSlicer/config/OrcaSlicer/user/default

Bambu Studio (Flatpak)

📁 Absolute Path: 
/var/home/$USER/.var/app/com.bambulab.BambuStudio/config/BambuStudio/user/default
or
$HOME/.var/app/com.bambulab.BambuStudio/config/BambuStudio/user/default
📁 Relative Path: 
~/.var/app/com.bambulab.BambuStudio/config/BambuStudio/user/default

Contributing

Feel free to fork the repo, submit your own presets, or enhance existing ones. Every contribution helps the community optimize their 3D printing experience!

Filament Presets

Note 注意

Make sure whenever you have done a calibration, select the profile before continuing with the next calibration, as selecting a default profile will not result in the best preset for all calibration methods.

Bambu Studio

For the best results, please follow these instructions step by step.

  1. Begin with the “Flow Dynamics Calibration” steps provided in this official guide https://wiki.bambulab.com/en/software/bambu-studio/calibration_pa
  2. Use the auto calibration mode first, if that one does not successfully finish, please skip to step 4.
  3. Continue with auto-calibration mode for “Flow Rate Calibration” https://wiki.bambulab.com/en/software/bambu-studio/calibration_flow_rate
  4. Now to create a preset as optimized as possible again run a manual check with Manual mode in Flow Dynamics Calibration
  5. So do the same manual calibration for the “Flow Rate Calibration”.

Orca Slicer

For the best results, please follow these instructions step by step.

  1. Begin with the “Flow Rate Calibration” steps provided in this official guide: https://github.com/SoftFever/OrcaSlicer/wiki/Calibration#flow-rate
  2. Also, the line method is highly recommended to finetune the Pressure Advance: https://github.com/SoftFever/OrcaSlicer/wiki/Calibration#pressure-advance
  3. Continue with the “Flow Dynamics Calibration” steps provided in this guide https://wiki.bambulab.com/en/software/bambu-studio/calibration_pa
  4. For refined overhangs or bridging, the “Temperature Tower” just finds the perfect spot for the hotend. Please run this with the recommended temperature range of the manufacturer. https://github.com/SoftFever/OrcaSlicer/wiki/Calibration#Temp-tower
  5. (optional) To get the “Maximum Volumetric Speed” for each filament, you can run through the steps at https://github.com/SoftFever/OrcaSlicer/wiki/Calibration#max-volumetric-speed and determine the “Maximum Volumetric Speed”. This would help limit the max speed / volumetric extrusion for the filament.
To-Do
  • GIFs for docu on importing presets
  • More Presets

Star History

Thank you all so much for over 100 stars! When I first started, my goal was simply to gather a few presets to speed up printing and benefit from presets that were already fine-tuned. Your support has truly exceeded my expectations! Star History Chart

评论

暂无评论